Overview
Manuals
Controller Fit
Carrier Match
Field Testing
Features:
- CPU 417-5H PN/DP for the documented SIMATIC S7-400H.
- Product type designation: CPU 417-5H PN/DP.
- CiR synchronization time, basic load: 60 ms.
6ES7417-5HT06-0AB0 belongs to the SIMATIC S7-400H and performs the documented cpu 417-5h pn/dp role in the Siemens SIMATIC S7-400H automation system. The retained technical evidence records Product type designation: CPU 417-5H PN/DP; CiR synchronization time, basic load: 60 ms; Input current from backplane bus 5 V DC, typ.: 1.6 A. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the SIMATIC S7-400H receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The 6ES7417-5HT06-0AB0 CPU 417-5H PN/DP is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Siemens 6ES7417-5HT06-0AB0 CPU 417-5H PN/DP Manual(Datasheets), Link
Important Notice: The uploaded PDF documents 6ES7417-5HT06-0AB0 or its identified product family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Controller Fit: 6ES7417-5HT06-0AB0 performs the cpu 417-5h pn/dp function within the SIMATIC S7-400H. The retained documentation identifies product type designation as CPU 417-5H PN/DP; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Carrier Match: approve 6ES7417-5HT06-0AB0 only for the documented Siemens SIMATIC S7-400H automation system. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Field Testing: isolate the equipment, remove stored energy and inspect the receiving hardware before installing 6ES7417-5HT06-0AB0.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
