Overview
Manuals
Capacity and Card Identity
CPU and Project Compatibility
Backup and Startup Control
Features:
- 2 MB Nflash program memory for documented SIMATIC controllers.
- 3.3 V Micro Memory Card execution.
- Supports approved S7-300, C7 and ET 200 CPU applications.
The complete article number and 2 MB capacity must match the receiving CPU and controlled project. Never initialize, overwrite or exchange a memory card without an approved backup and recovery plan.
Record the card label, CPU article and firmware, STEP 7 project version, hardware configuration, protection settings and current diagnostic state. Validate the backup offline, insert the card with power removed where required and test the complete startup sequence.
The 6ES7953-8LL31-0AA0 Siemens SIMATIC S7 2 MB Micro Memory Card is listed as Active / Available from OEM. Current revision, availability and supplied scope are confirmed in the written quotation.
Siemens 6ES7953-8LL31-0AA0 documentation and reference links.
Important Notice: Confirm the complete order identity, hardware execution, receiving-system configuration and required document revision before replacement.
6ES7953-8LL31-0AA0 is the 2 MB, 3.3 V Nflash Micro Memory Card execution. Match the complete article and capacity before use.
Confirm the S7-300, C7 or ET 200 CPU article, firmware, supported card size and STEP 7 project before transferring any data.
Create and validate the controlled backup, preserve write protection and version records, then verify CPU startup and diagnostics after insertion.
