Overview
Manuals
Supply Function
Platform Review
Commissioning
Features:
- Power Supply Module for the documented Yokogawa CENTUM VP.
- Product Type: Power Supply Module.
- Product Series: Yokogawa CENTUM VP.
SPW482-13 S1 belongs to the Yokogawa CENTUM VP and performs the documented power supply module role in the Yokogawa CENTUM process-control system. The retained technical evidence records Product Type: Power Supply Module; Product Series: Yokogawa CENTUM VP; System Platform: Yokogawa CENTUM process-control system. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Yokogawa CENTUM VP receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The SPW482-13 S1 Power Supply Module is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Yokogawa SPW482-13 S1 Power Supply Module Manual(Datasheets), Link
Important Notice: The uploaded PDF documents SPW482-13 S1 or its identified manufacturer product family. Confirm the complete order code, hardware execution and installed-system requirements before replacement.
Supply Function: SPW482-13 S1 performs the power supply module function within the Yokogawa CENTUM VP. The retained documentation identifies product type as Power Supply Module; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Platform Review: approve SPW482-13 S1 only for the documented Yokogawa CENTUM process-control system. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Commissioning: isolate the equipment, remove stored energy and inspect the receiving hardware before installing SPW482-13 S1.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
