Request a Parts Quote
Name
Company *
Phone *
Email *
Address
City
State / Province / Region
Zipcode
Country
Quantity *
Part Number *
Manufacturer
Preferred Condition
Additional Information
Cancel
ABB PM856AK01 3BSE066490R1
ABB PM856AK01 3BSE066490R1
ABB PM856AK01 3BSE066490R1
ABB PM856AK01 3BSE066490R1
ABB PM856AK01 3BSE066490R1
ABB PM856AK01 3BSE066490R1
  • ISO 9001:2015 Certified

    Our quality management system covers sourcing,testing and dispatch
  • View Our Success Stories

    Real stories from real customer orders
In Stock
Ships by Monday, September 7
Fast Shipping Available
Processor unit

PM856AK01 3BSE066490R1

Product Information:

24 MHz processor unit with 16 MB RAM and 10.337 MB available for the application. Configured for non-redundant CPU operation. Provides 2 Ethernet channels and supports 12 CEX-Bus communication modules.


Product image is representative; revision or series may vary. Contact us to request a specific version.
  • One-year warranty
  • Global shipping
  • Exact-model verification
    • PRODUCT OVERVIEW

      What is this product?

      ABB identifies PM856AK01 3BSE066490R1 as a 24 MHz PM856A processor unit in the AC 800M controller family. It provides 16 MB RAM, including 10.337 MB available for the application, and uses the MPC860 processor architecture documented by ABB. The unit supports 2 Ethernet channels, up to 12 CEX-Bus communication modules and maximum 96 non-redundant i/o modules. This version is intended for non-redundant CPU configurations. Selection must be based on the complete 3BSE066490R1 article number, CPU type, control-software version and installed bus configuration.

      Source boundary

      Technical values are taken from ABB AC 800M controller and processor-unit documentation. Final compatibility is confirmed against article number 3BSE066490R1, the installed controller nameplate and the project hardware configuration.
    • APPLICATIONS

      Where it may be used

      The following contexts apply only after PM856AK01 3BSE066490R1, its software level, bus layout and non-redundant controller role have been verified.

      Medium-capacity single CPU

      Run a verified 16 MB application without CPU redundancy.

      Twelve-interface communication host

      Support the approved CEX-Bus population for a standard process cell.

      Expanded local I/O controller

      Coordinate up to ninety-six documented non-redundant I/O modules.

      PM851 capacity uplift review

      Apply the larger application-memory profile only after project comparison.
Technical specifications for

PM856AK01 3BSE066490R1

0 TECHNICAL PARAMETERS
  • Manufacturer:
    ABB
  • Product Category:
    DCS Systems
  • Product type:
    Processor unit
  • CPU module:
    PM856A
  • Clock frequency:
    24 MHz
  • Memory (RAM):
    16 MB
  • RAM available for application:
    10.337 MB
  • Processor type:
    MPC860
  • High Integrity controller:
    No
  • Flash storage for application and data:
    Yes
  • CPU redundancy support:
    No
  • Redundant switch-over time:
    Not applicable
  • Performance, 1000 Boolean operations:
    0.46 ms
  • Power supply:
    24 VDC (19.2 to 30 VDC)
  • Power consumption, typical / maximum:
    180 / 300 mA
  • Typical power dissipation:
    4.32 W
  • Ethernet channels:
    2 channels
  • Communication modules on CEX-Bus:
    12
  • ModuleBus I/O capacity:
    maximum 96 non-redundant I/O modules
  • Stock:
    31
WHAT HAPPENS NEXT?

From enquiry to delivery

Six clear steps show what information is required and what the written quotation will contain.
  • 01

    Find the product

    Search the part number or send an inquiry for obsolete, discontinued or hard-to-find parts.
  • 02

    Provide the details

    Share the exact part number, quantity, condition, revision, destination and any required certificates or photos.
  • 03

    Review the quotation

    Receive price, currency, condition, availability, warranty, lead time, shipping terms and quotation validity in writing.
  • 04

    Confirm the order

    Accept the quotation in writing and complete the required payment before shipment.
  • 05

    Pay by bank transfer

    Pay the full invoiced amount by bank wire in RMB/CNY, GBP, EUR or USD using the official invoice details.
  • 06

    Verify and dispatch

    The part is inspected, tested and securely packed before dispatch, with tracking provided after release.
BUYER INFORMATION

Product condition level information

Commercial details are confirmed in writing before payment.
  • 01

    Factory Sealed

    Unused product with the original factory seal intact; packaging age or storage marks may still be present.

  • 02

    Original Pack

    Unused product in original manufacturer packaging that was not originally factory sealed.

  • 03

    Factory New

    New and current product sourced through the manufacturer or authorized supply channel when expressly confirmed in the quotation.

Alternative Names

PM856AK01 3BSE066490R1 PM856AK01 3BSE066490R1 PM856A processor unit

Information

Overview Manuals Memory Allocation Non-Redundant Controller Layout Interface and I/O

Features:

  • 24 MHz PM856A processing with 16 MB RAM and 10.337 MB available for application execution
  • 2 integrated Ethernet channels plus support for 12 CEX-Bus communication modules in the documented controller layout
  • Non-redundant CPU operation and maximum 96 non-redundant i/o modules through the verified ModuleBus arrangement
ABB identifies PM856AK01 3BSE066490R1 as a 24 MHz PM856A processor unit in the AC 800M controller family. It provides 16 MB RAM, including 10.337 MB available for the application, and uses the MPC860 processor architecture documented by ABB. The unit supports 2 Ethernet channels, up to 12 CEX-Bus communication modules and maximum 96 non-redundant i/o modules. This version is intended for non-redundant CPU configurations. Selection must be based on the complete 3BSE066490R1 article number, CPU type, control-software version and installed bus configuration.

Technical values are taken from ABB AC 800M controller and processor-unit documentation. Final compatibility is confirmed against article number 3BSE066490R1, the installed controller nameplate and the project hardware configuration.

The ABB PM856AK01 3BSE066490R1 AC 800M processor unit is supported by Moore Automated for verified industrial replacement and spare-part requirements.
ABB PM856AK01 3BSE066490R1 AC 800M processor unit manual(Datasheets), Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

PM856A Memory Allocation

PM856A combines 24 MHz processing with 16 MB RAM and 10.337 MB available for the application.

Non-Redundant Controller Layout

This processor does not support CPU redundancy, so confirm the project is engineered for a single controller before supply.

Interface and I/O Planning

Review both Ethernet channels, the CEX-Bus population and the local ModuleBus capacity against the saved hardware configuration.

Technical notes

PM856AK01 3BSE066490R1 is an ABB AC 800M processor unit built around the PM856A CPU, with a 24 MHz clock, 16 MB RAM and 10.337 MB available for the control application. ABB documents 2 Ethernet channels, 12 supported CEX-Bus communication modules, non-redundant CPU operation, a 24 VDC supply and IP20 construction. Replacement engineering must verify article number 3BSE066490R1, firmware and control-system version, the ModuleBus/CEX-Bus layout and every redundant-partner detail before installation.

PM856AK01 Non-Redundant Unit Check

Confirm the complete PM856AK01 3BSE066490R1 identity, article number 3BSE066490R1, PM856A nameplate, CPU or hardware revision, processor-unit kit contents and the installed non-redundant controller arrangement. If any marking is unclear, provide close photos of the front label, side label and connections.

PM856A Order Matching Details

For an accurate quotation, provide quantity, the complete PM856AK01 3BSE066490R1 and 3BSE066490R1 identity, nameplate photos, controller software version, CEX-Bus and ModuleBus configuration, receiving country and required delivery date. Moore Automated will use these records to match the exact processor unit.

Customs & shipping dimensions / weight

  • Packed shipping dimensions
    Confirmed after final packing
    Approx. 11.9 x 18.6 x 13.5 cm
  • Packed shipping weight
    Confirmed after final packing
    Approx. 1.10 kg
  • HS / customs code
    Indicative HS code 85371091
    Final destination-specific classification requires customs confirmation
  • Country of origin
    Sweden
    Confirmed from ABB product documentation
  • Ships from
    Xiamen, Fujian, China
    Dispatch location confirmed in the written quotation
  • Customs documents
    Confirmed for the destination
    Available document scope stated in the written quotation
PRODUCT & ORDER FAQS

Questions buyers ask about PM856AK01 3BSE066490R1

  • How is the complete PM856AK01 3BSE066490R1 identity verified?

    Confirm PM856AK01 3BSE066490R1, ABB article number 3BSE066490R1, the PM856A designation, kit contents and all nameplate markings. If any label is unclear, provide close photos before quotation.
  • Which configuration details control PM856AK01 3BSE066490R1 compatibility?

    Compatibility depends on the installed 800xA or Compact Control Builder version, CPU redundancy arrangement, CEX-Bus and ModuleBus layout, memory requirement and the exact 3BSE066490R1 identity.
  • Where does PM856AK01 3BSE066490R1 fit in an AC 800M architecture?

    PM856AK01 3BSE066490R1 is the documented 24 MHz, 16 MB processor unit for the stated ABB AC 800M configuration. Its controller role must be confirmed against the project hardware definition.
  • What should be recorded before installing PM856AK01 3BSE066490R1?

    Back up the control application and hardware configuration; record firmware, Ethernet settings, serial links, CEX-Bus modules, ModuleBus clusters, power feeds and the redundant partner before removal.
  • Can current availability of PM856AK01 3BSE066490R1 be confirmed?

    Yes. Moore Automated checks the requested quantity, complete PM856AK01 3BSE066490R1 / 3BSE066490R1 identity and the required condition before confirming availability in writing.
  • What warranty is supplied with PM856AK01 3BSE066490R1?

    Moore Automated provides a one-year warranty for the offered PM856AK01 3BSE066490R1. The quotation records unit condition, identification, coverage and claim requirements.
  • Which delivery facts are needed for PM856AK01 3BSE066490R1?

    Provide quantity, receiving country, postal code and required date. Because the unit contains or is supplied with a lithium backup battery where documented, the packing and carrier method are confirmed before dispatch.
  • Which ABB document supports PM856AK01 3BSE066490R1?

    Technical verification uses ABB AC 800M controller data, the official processor-unit listing and article number 3BSE066490R1. Final suitability is checked against the installed unit and system records.
MORE PARTS IN THE SAME PROJECT?

Search another part number

Use the exact manufacturer number where possible.
WHY BUYERS WORK WITH MOORE AUTOMATED

Clear checks before you commit

Product-specific verification and written commercial details help purchasing and maintenance teams reduce mismatch risk.
  • Pre-shipment inspection

    Products are inspected before dispatch to verify model, condition and applicable specifications.
  • Documentation available

    Product photos, packaging photos, certificates and datasheets can be provided when available.
  • Clear commercial terms

    Condition, warranty, lead time, included items and shipping terms are stated clearly in writing.
  • 20+ years of experience

    Over 20 years of experience in industrial automation and hard-to-source legacy parts.
  • Product Lifecycle Stage

    Active / Available from OEM

    ABB includes PM856AK01 in the active AC 800M processor portfolio. Moore Automated supplies verified ABB processor units and related spare modules; application memory, non-redundant CPU role, communication interfaces and article number are checked to reduce downtime.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Moore Disclaimer: Moore Automated's sales automation equipment and related solutions are intended for industrial automation and business operational efficiency improvement purposes only. Product information, technical parameters, and application cases are for reference only and do not constitute an absolute guarantee of performance for any specific industry, scenario, or final application. Actual equipment performance may vary depending on factors such as the usage environment, system integration method, and maintenance conditions. Users should confirm compatibility and safety based on professional technical assessments. Moore Automated assumes no liability for any direct or indirect losses caused by improper use, modification, or failure to operate according to specifications, to the extent permitted by law.

Get a quick price for:

PM856AK01 3BSE066490R1
Quantity
Upload
(gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
For more information on how your data is processed and stored by Moore Automated please read our privacy policy.