Overview
Manuals
Processor Package Details
Bus Topology Limits
Migration Checkpoints
Features:
- The 3BSE018100R1 package identifies one PM860 CPU together with its TP830 baseplate, CEX-bus and ModuleBus terminators, plus the documented backup battery.
- A 48 MHz MPC860 processor and 16 MB RAM support the established AC 800M application within the memory and execution boundaries published for this CPU generation.
- PM860 does not support CPU redundancy; any move to PM860AK01 requires a controlled review of project software, communication interfaces and the installed I/O topology.
PM860K01 3BSE018100R1 is an ABB AC 800M processor-unit package built around the PM860 CPU. ABB identifies the kit as a PM860 processor with TP830 baseplate, TB850 CEX-bus terminator, TB807 ModuleBus terminator and memory-backup battery. The MPC860 processor operates at 48 MHz with 16 MB RAM, and ABB publishes a 0.23 ms execution figure for 1000 Boolean operations. PM860 is a nonredundant CPU, so it must not be ordered as one half of a redundant pair. The controller coordinates the configured CEX-bus communication interfaces and local ModuleBus I/O for an established control project. Replacement selection must preserve the original Control Builder or 800xA project, communication modules, I/O layout, power supply and termination hardware. ABB's later PM860AK01 is the documented migration direction, but project and hardware compatibility must be reviewed before conversion.
ABB Compact Products 800 product catalog. Values apply to the PM860 CPU and the 3BSE018100R1 K01 package.
The ABB PM860K01 3BSE018100R1 is supported by Moore Automated for exact-item replacement and spare-part enquiries.
ABB PM860K01 3BSE018100R1 Processor unit kit manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The K01 article includes one PM860 CPU, TP830 baseplate, TB850 CEX-bus terminator, TB807 ModuleBus terminator and backup battery. Verify every supplied item because a bare PM860 CPU is not the complete documented kit.
PM860 is a nonredundant AC 800M CPU. Record the connected CEX modules, electrical and optical ModuleBus arrangement, I/O count and project scan requirements before replacing the processor.
PM860AK01 3BSE066495R1 is the later replacement direction. Compare controller software, firmware, baseplate, communication modules, I/O configuration and application capacity before migrating.
