Overview
Manuals
Redundant HI Package
Switchover Boundaries
Paired Bus Connections
Features:
- 3BSE081638R1 identifies the two-unit PM867K02 package; each PM867 CPU retains its own 133 MHz processor and 46.559 MB application-memory limit.
- The High Integrity design is certified for SIL3 use when configured under ABB's Safety Manual and the stated 800xA 6.0.2 and later engineering environment.
- CPU redundancy is supported with a maximum 10 ms switchover; the redundant layout uses 7 optical clusters and the complete kit or matching partner hardware must be verified.
PM867K02 3BSE081638R1 is an ABB AC 800M redundant high integrity processor kit built around the PM867 CPU. Its MPC866 runs at 133 MHz with 64 MB RAM and 46.559 MB available to the application. The K02 order combines two PM867 processors with the documented CEX/RCU link hardware. Performance and memory limits apply to each CPU and are not pooled. ABB classifies the CPU as a High Integrity controller for SIL3 safety and combined control-and-safety configurations. Certified use requires the associated safety module, approved libraries and engineering restrictions described in the Safety Manual. The 24 VDC processor supports up to 12 CEX-bus modules. Local I/O uses 1 electrical + 7 optical clusters in single operation and 7 optical in a redundant arrangement, subject to 96 / 84 I/O modules. Control Network communication is provided through 2 x 10 Mbit/s RJ45 per CPU using MMS and IAC. Selection must preserve 800xA 6.0.2 and later, the installed project, CPU generation, partner hardware and bus topology.
ABB AC 800M Controller and Communication Interfaces, 3BSE063691, and the current ABB System 800xA product catalog. Values apply to the stated CPU and package configuration.
The ABB PM867K02 3BSE081638R1 is supported by Moore Automated for exact-item replacement and spare-part enquiries.
ABB PM867K02 3BSE081638R1 Redundant High Integrity processor kit manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ABB identifies PM867K02 3BSE081638R1 as a two-processor order: two PM867 CPUs, two TP830 bases, two TB807 terminators, TK850, TB851 and two backup batteries; no license. Confirm both CPU labels and the cable/terminator inventory before treating an offered set as complete.
Each PM867 CPU uses a 133 MHz MPC866 with 64 MB RAM and 46.559 MB application space. The 0.09 ms Boolean benchmark is not the complete process-loop response time.
The processor accepts up to 12 CEX-bus modules and uses 1 electrical + 7 optical clusters in single operation. The redundant layout is 7 optical; apply the 96 / 84 I/O modules limit and verify 800xA 6.0.2 and later.
