Overview
Manuals
Channel Planning
System Compatibility
Commissioning Checkpoints
Features:
- AI815 3BSE052604R1
- Accepts 0(4)-20 mA current and 0(2)-10 V voltage signals
- 8-channel analog input module in the ABB S800 I/O
The ABB AI815 3BSE052604R1 is a 8-channel analog input module in the ABB S800 I/O. The manufacturer specifies it accepts 0(4)-20 mA current and 0(2)-10 V voltage signals. Eight channels are arranged for general process measurement in an S800 station. Its ordering identity combines AI815 with 3BSE052604R1; both references should be checked when selecting a replacement. Engineering confirmation should also cover selected current or voltage range, module termination unit and configured channel type and the installed base or terminal hardware before the unit is placed into service.
Values are based on the manufacturer's official ABB S800 I/O documentation. Final selection must be verified against the complete article number and installed configuration.
The ABB AI815 3BSE052604R1 8-channel analog input module is supported by Moore Automated for verified industrial replacement and spare-part requirements.
ABB AI815 3BSE052604R1 8-channel analog input module manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
AI815 3BSE052604R1 should be engineered using the official ABB S800 I/O documentation, with the stated current and voltage inputs matched to the configured signal path.
Before installation, confirm selected current or voltage range, module termination unit and configured channel type, the associated base or terminal hardware, and the field-side electrical conditions shown in the manufacturer's instructions.
Use the complete article number when comparing units. Channel configuration, connected equipment and any safety or communication requirements must remain consistent with the verified design.
