Request a Parts Quote
Name
Company *
Phone *
Email *
Address
City
State / Province / Region
Zipcode
Country
Quantity *
Part Number *
Manufacturer
Preferred Condition
Additional Information
Cancel
  • ISO 9001:2015 Certified

    Our quality management system covers sourcing,testing and dispatch
  • View Our Success Stories

    Real stories from real customer orders
In Stock
Ships by Monday, September 21
Fast Shipping Available
RTD input module

AI830A

Spare Part Number

PN3BSE040662R1

Product Information:

8-channel RTD input module for ABB S800 I/O. It provides eight channels for Pt100, Ni100, Ni120, Cu10 and resistance inputs. Three-wire measurement compensates lead resistance for supported sensor types. Selection is based on the complete ordering reference.

  • One-year warranty
  • Global shipping
  • Exact-model verification
    • PRODUCT OVERVIEW

      What is this product?

      The ABB AI830A 3BSE040662R1 is a 8-channel rtd input module in the ABB S800 I/O. The manufacturer specifies it provides eight channels for Pt100, Ni100, Ni120, Cu10 and resistance inputs. Three-wire measurement compensates lead resistance for supported sensor types. Its ordering identity combines AI830A with 3BSE040662R1; both references should be checked when selecting a replacement. Engineering confirmation should also cover RTD sensor type, three-wire connection, measurement range and TU8xx termination unit and the installed base or terminal hardware before the unit is placed into service.

      Source boundary

      Values are based on the manufacturer's official ABB S800 I/O documentation. Final selection must be verified against the complete article number and installed configuration.
    • APPLICATIONS

      Where it may be used

      This ABB S800 I/O item is used where temperature and resistance sensors are connected to distributed S800 I/O. The following checks keep the application summary concise and model-specific.

      RTD temperature capture

      Pt and Ni sensors wired to configured channels.

      Resistance monitoring

      Supported linear resistance ranges in process equipment.

      Three-wire sensor retrofit

      Lead compensation retained during module replacement.

      Temperature cabinet service

      Verified AI830A exchange in an S800 station.
Technical specifications for

AI830A

0 TECHNICAL PARAMETERS
  • Manufacturer:
    ABB
  • Product Category:
    DCS Systems
  • Spare Part Number:
    3BSE040662R1
  • Number of channels:
    8
  • Supported sensors:
    Pt100, Ni100, Ni120, Cu10
  • Connection:
    3-wire RTD
  • Measurement:
    Temperature and resistance
  • Resolution:
    14 bit
  • Lead compensation:
    Supported for 3-wire inputs
  • Isolation:
    Group isolated
  • Mounting:
    S800 I/O termination unit
  • Configuration:
    Sensor type per channel
  • Stock Availability:
    51
WHAT HAPPENS NEXT?

From enquiry to delivery

Six clear steps show what information is required and what the written quotation will contain.
  • 01

    Find the product

    Search the part number or send an inquiry for obsolete, discontinued or hard-to-find parts.
  • 02

    Provide the details

    Share the exact part number, quantity, condition, revision, destination and any required certificates or photos.
  • 03

    Review the quotation

    Receive price, currency, condition, availability, warranty, lead time, shipping terms and quotation validity in writing.
  • 04

    Confirm the order

    Accept the quotation in writing and complete the required payment before shipment.
  • 05

    Pay by bank transfer

    Pay the full invoiced amount by bank wire in RMB/CNY, GBP, EUR or USD using the official invoice details.
  • 06

    Verify and dispatch

    The item receives a pre-shipment inspection and suitable protective packaging. Functional testing is performed only where appropriate equipment and procedures are available for the specific item. We confirm the applicable inspection scope and provide tracking after dispatch.
BUYER INFORMATION

Product condition level information

Commercial details are confirmed in writing before payment.
  • 01

    Factory Sealed

    Unused product with the original factory seal intact; packaging age or storage marks may still be present.

  • 02

    Original Pack

    Unused product in original manufacturer packaging that was not originally factory sealed.

  • 03

    Factory New

    New and current product sourced through the manufacturer or authorized supply channel when expressly confirmed in the quotation.

Alternative Names

AI830A AI830A 3BSE040662R1 3BSE040662R1

Information

Overview Manuals Hardware Configuration Field Connection Engineering Considerations

Features:

  • AI830A 8-channel rtd input module
  • 3BSE040662R1 ABB S800 I/O
  • Three-wire measurement compensates lead resistance for supported sensor types
The ABB AI830A 3BSE040662R1 is a 8-channel rtd input module in the ABB S800 I/O. The manufacturer specifies it provides eight channels for Pt100, Ni100, Ni120, Cu10 and resistance inputs. Three-wire measurement compensates lead resistance for supported sensor types. Its ordering identity combines AI830A with 3BSE040662R1; both references should be checked when selecting a replacement. Engineering confirmation should also cover RTD sensor type, three-wire connection, measurement range and TU8xx termination unit and the installed base or terminal hardware before the unit is placed into service.

Values are based on the manufacturer's official ABB S800 I/O documentation. Final selection must be verified against the complete article number and installed configuration.

The ABB AI830A 3BSE040662R1 8-channel RTD input module is supported by Moore Automated for verified industrial replacement and spare-part requirements.
ABB AI830A 3BSE040662R1 8-channel RTD input module manual(Datasheets), Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

AI830A 3BSE040662R1 should be engineered using the official ABB S800 I/O documentation, with the stated RTD and resistance measurement matched to the configured signal path.

Before installation, confirm RTD sensor type, three-wire connection, measurement range and TU8xx termination unit, the associated base or terminal hardware, and the field-side electrical conditions shown in the manufacturer's instructions.

Use the complete article number when comparing units. Channel configuration, connected equipment and any safety or communication requirements must remain consistent with the verified design.

Technical notes

AI830A 3BSE040662R1 is a 8-channel rtd input module in the ABB S800 I/O. Official data identifies it provides eight channels for Pt100, Ni100, Ni120, Cu10 and resistance inputs. Three-wire measurement compensates lead resistance for supported sensor types. Engineering replacement requires confirmation of RTD sensor type, three-wire connection, measurement range and TU8xx termination unit, the terminal or base hardware, and the complete order code before installation.

Order-Code Validation

Verify AI830A 3BSE040662R1 exactly. Check the AI830A suffix, 3BSE040662R1 article number and sensor configuration; if any suffix, hardware marking or label detail is unclear, provide clear photographs of the complete nameplate and connectors before ordering.

Buyer Data for Accurate Selection

For an accurate Moore Automated quotation, provide the required quantity, complete part number AI830A 3BSE040662R1, nameplate photographs, sensor type, resistance range, wiring method and terminal unit, destination country and requested delivery date.

Customs & shipping dimensions / weight

  • Packed shipping dimensions
    Confirmed after final packing
    Approx. 4.5 x 10.2 x 11.9 cm
  • Packed shipping weight
    Confirmed after final packing
    Approx. 0.22 kg
  • HS / customs code
    Indicative HS code 85389091
    Final destination-specific classification requires customs confirmation
  • Country of origin
    Sweden
    Confirmed from manufacturer documentation and the actual unit nameplate where available
  • Ships from
    Xiamen, Fujian, China
    Dispatch location confirmed in the written quotation
  • Customs documents
    Confirmed for the destination
    Available document scope is stated in the written quotation
PRODUCT & ORDER FAQS

Questions buyers ask about AI830A

  • How is the exact AI830A item identified?

    Match the complete designation AI830A 3BSE040662R1, including the order number and all suffixes. A clear nameplate photograph is recommended when any marking is uncertain.
  • How should AI830A system compatibility be reviewed?

    Confirm the RTD sensor type, three-wire connection, measurement range and TU8xx termination unit; compatibility must be checked against the installed hardware and the manufacturer's system documentation.
  • Where is this 8-channel rtd input module normally used?

    Temperature and resistance sensors are connected to distributed S800 I/O.
  • What should be verified before installing AI830A?

    Check the terminal or base-unit assignment, field wiring, supply conditions and configured channel behavior before replacement.
  • Can current availability for AI830A 3BSE040662R1 be confirmed?

    Yes. Moore Automated confirms condition, quantity and lead time in the written quotation for the exact ordering reference.
  • What warranty information is supplied with a quote?

    The written quotation states the independent-supplier warranty period, covered condition and claim requirements for the offered unit.
  • What must the buyer provide for shipment planning?

    Provide the required quantity, destination country and requested delivery date so dispatch arrangements can be confirmed.
  • What photographs help verify this order?

    Send the front label, side label, connectors and any base or terminal unit so the complete identity can be compared before supply.
MORE PARTS IN THE SAME PROJECT?

Search another part number

Use the exact manufacturer number where possible.
WHY BUYERS WORK WITH MOORE AUTOMATED

Clear checks before you commit

Product-specific verification and written commercial details help purchasing and maintenance teams reduce mismatch risk.
  • Pre-shipment inspection

    Products are inspected before dispatch to verify model, condition and applicable specifications.
  • Documentation available

    Product photos, packaging photos, certificates and datasheets can be provided when available.
  • Clear commercial terms

    Condition, warranty, lead time, included items and shipping terms are stated clearly in writing.
  • 20+ years of experience

    Over 20 years of experience in industrial automation and hard-to-source legacy parts.
  • Product Lifecycle Stage

    Active / Available from OEM

    Moore Automated supplies quality ABB replacement modules and spare parts matched to the complete ordering reference. Verified supply helps reduce maintenance risk and customer downtime.

Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Moore Disclaimer: Moore Automated's sales automation equipment and related solutions are intended for industrial automation and business operational efficiency improvement purposes only. Product information, technical parameters, and application cases are for reference only and do not constitute an absolute guarantee of performance for any specific industry, scenario, or final application. Actual equipment performance may vary depending on factors such as the usage environment, system integration method, and maintenance conditions. Users should confirm compatibility and safety based on professional technical assessments. Moore Automated assumes no liability for any direct or indirect losses caused by improper use, modification, or failure to operate according to specifications, to the extent permitted by law.

Get a quick price for:

AI830A
Quantity
Upload
(gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
For more information on how your data is processed and stored by Moore Automated please read our privacy policy.