Overview
Manuals
Terminal Layout
Module Compatibility
Field Wiring
Features:
- ABB article 3BSE013234R1 identifies TU830V1 as a 16-channel Extended Module Termination Unit for S800 I/O installations.
- Confirm article 3BSE013234R1, TU830V1 designation, I/O module compatibility, 50 V limit, terminal assignment, process-power grouping, fuses and DIN-rail position before replacement.
- Use TU830V1 only with a documented compatible S800 I/O module and field-wiring arrangement whose terminals and process-voltage groups match the installed design.
TU830V1 must be matched to the receiving equipment and project record. Isolate field power, label all 56 process connections, preserve the two isolated voltage groups and 6.3 A fuse arrangement, and secure the MTU on the DIN rail. After installation, inspect keying and terminal security, verify group power and fuses, then prove every assigned I/O channel through the controller commissioning procedure.
Official source: official ABB TU830V1 product PDF. Values not tied to the exact official source are withheld.
TU830V1 official technical documentation and verified Moore Automated resources.
Important Notice: Confirm the complete model, article number and installed configuration before replacement. All links open in a new page.
Preserve all 56 process connections and the documented I/O and zero-potential terminals per channel.
Confirm the installed S800 I/O module is listed for TU830V1 and that mechanical keying agrees.
Verify the two isolated process-voltage groups, 6.3 A fuses and 2 A per-channel limit before commissioning.
