Registered Address: 32D Floor Guomao Building, No.388, Hubin South Road, Siming District, Xiamen,Fujian, China
ABB 07PS62 R2 is a CMOS-RAM program memory module for the Procontic T200 control system. The official T200 documentation specifies capacity for 15.7 k instructions and 16 k word flags, using the common T200 instruction set through the installed central unit. The complete R2 identity, memory retention condition and target CPU configuration must be verified before replacement.
07PS62R2 is used where a verified Procontic T200 CPU requires its documented CMOS-RAM program-memory class. Preserve and validate the user program before removal, then confirm the central-unit type, R2 module identity and retention condition before commissioning.
Important Notice: Confirm the complete model, revision and installed system before replacement.
ABB documents the 07 PS 62 R2 as program memory for 15.7 k instructions with 16 k word flags. This capacity class must be matched to the saved Procontic T200 application; it is not interchangeable with a different memory technology or capacity solely because the connector arrangement appears similar.
The 07PS62R2 must be paired with the documented Procontic T200 central unit and the application memory requirement. Verify the full GJV3074332R2 article number, R2 execution, module position and CPU configuration before insertion; also secure a valid program backup before removing the installed memory.
Record the installed 07 PS 62 R2 label, save and validate the controller program, confirm CPU and memory-class compatibility, and review the retention condition before exchange. After installation, restore only the approved program, verify controller diagnostics and confirm normal application operation before returning the Procontic T200 system to service.
Engineering check: Confirm 07PS62R2 is the R2 CMOS-RAM module with 15.7 k instructions program capacity and 16 k word flags data memory. Check battery-backed retention and inspect the connector before transferring the Procontic T200 application.
Acceptance test: Load the approved program and compare checksum, data areas and initialization values. Cycle power under controlled conditions and verify the T200 resumes the intended sequence with no memory, checksum or addressing faults.
ABB 07PS62R2 is a legacy Procontic T200 CMOS-RAM program memory module. Moore Automated supplies inspected ABB replacement modules and spare parts matched by GJV3074332R2, R2 execution and target CPU configuration. Exact verification and responsive sourcing help reduce controller-recovery time and unplanned downtime.