Overview
Manuals
Axis 2 Gear
IRB Fit
Swap Checks
Features:
- The documented product type is Robot reduction gear / gearbox, and this value must match the supplied unit.
- The documented product id is 3HAC048232-001, and this value must match the supplied unit.
- The documented catalog description is RV-550N-252.33 Axis 2 Reduction Gear, and this value must match the supplied unit.
ABB 3HAC048232-001 is a RV-550N-252.33 Axis 2 Reduction Gear documented for the applicable ABB Robots system configuration. Its recorded specification includes product type Robot reduction gear / gearbox, product id 3HAC048232-001, catalog description RV-550N-252.33 Axis 2 Reduction Gear. Correct selection depends on the complete article identity, installed equipment, mechanical or electrical interfaces and the documented configuration rather than appearance alone. Using the exact model helps maintenance teams avoid incompatible revisions, connector arrangements and application variants.
Before installing 3HAC048232-001, record the original nameplate, installed position, connected assemblies and every relevant configuration detail. Compare the supplied unit with the existing hardware and applicable ABB service documentation, isolate all affected energy sources and preserve required settings or calibration data. After installation, inspect each affected interface and complete controlled functional checks before returning the equipment to service.
The 3HAC048232-001 ABB RV-550N-252.33 Axis 2 Reduction Gear is listed as Active / Available from OEM. Current revision, availability and supplied scope are confirmed in the written quotation.
ABB 3HAC048232-001 documentation and reference links.
Important Notice: Every linked document must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement.
3HAC048232-001 is documented for the axis 2. The complete gear designation and suffix govern selection.
Use 3HAC048232-001 only with the legacy axis-two gear execution; confirm robot variant, joint housing, seals and input/output geometry.
Before service, record the installed arrangement. After replacement, verify backlash, lubrication and the restored axis-two reference.
