Overview
Manuals
Panel Indications
Operator Controls
Wiring Verification
Features:
- Dedicated Electrical Indications: Presents voltage, current, power, frequency and power-factor values from the connected ABB SYNPol D equipment in one operator-facing interface.
- Integrated Operating Controls: Provides documented start, stop, manual, automatic, acknowledgement and synchronization keys for the matched system configuration.
- Alarm and Event Navigation: Combines LED numeric displays, an LCD window and membrane keys for reviewing operating status, alarms, service information and recorded events.
The CMA130 3DDE300410 serves as the operator and display front panel within compatible ABB SYNPol D equipment. Its interface brings the principal electrical values into one viewing position while giving operators direct access to the documented operating-mode, acknowledgement, synchronization, alarm and event functions of the connected system. The panel is intended to remain part of the established controller, wiring and application configuration rather than operate as a standalone controller.
For replacement work, the complete CMA130 and 3DDE300410 identity must be matched together with the rear-connector arrangement, panel cut-out, wiring positions, connected controller configuration and key assignments. After installation, the LED and LCD indications, required operator keys, alarms, events and communication with the SYNPol D equipment should be checked as part of commissioning; a visually similar panel alone does not establish electrical or software compatibility.
The CMA130 3DDE300410 ABB SYNPol D Operator and Display Panel may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
No exact-model English manufacturer PDF is linked to this listing. Use the verified internal series, brand and stock resources below.
Important Notice: Confirm CMA130, 3DDE300410, the rear connectors, panel cut-out and connected SYNPol D configuration before replacement.
Verify the voltage, current, power, frequency and power-factor display sections and confirm the alarm and tripped indications match the installed SYNPol D configuration.
Check the start, stop, manual, automatic, acknowledge, synchronization, display, menu, service and event keys against the receiving panel function list.
Record every rear connector and cable position before removal, confirm the panel cut-out and connector keying, then test indications and commands after installation.
