Overview
Manuals
Armored Cable Design
Extended Signal Path
Armored Signal Path
Features:
- The documented value for cable length is 8.0 meters (26.2 feet); retain this dimension when checking mounting geometry, routing and compatibility with the installed hardware.
- The documented value for connector protector and cable is Armored cable; verify the connector interface, electrical length and matching 3300 signal-chain components before commissioning.
- The documented value for agency approval is Not required; the complete approval suffix must match the installation area and site requirements.
330130-080-01-00 is a Bently Nevada 3300 XL Standard Extension Cable for the 3300 system. It connects the probe to a compatible Proximitor Sensor. Key specifications: Cable Length: 8.0 meters (26.2 feet); Agency Approval: Not required. Match the full order code and hardware before replacement.
The code “330130” designates the base model for the 3300 XL 8mm series extension cable; the core suffix “-080” specifies a precise factory-calibrated electrical length of 8.0 meters (26.2 feet)—which, when paired with a 1.0-meter probe, perfectly achieves the 9.0-meter total system length required for impedance matching under the API 670 international standard. Unlike armored versions, the “-01” designation indicates a design featuring a standard flexible outer jacket (without armor) and an integrated connector protector; this design offers effective protection against moisture and oil contamination, making it suitable for installation in conduits or cable trays within environments free from severe mechanical abrasion. Finally, the “-00” suffix denotes a base specification without specific hazardous area agency approvals, intended for use in safe, non-hazardous plant areas where explosion-proof or flame-proof ratings are not required.
The 330130-080-01-00 Bently Nevada 3300 XL Standard Extension Cable may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330130-080-01-00 3300 XL Standard Extension Cable manual (Datasheet), Link
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Review 330130-080-01-00 by complete length and construction code. Retained facts: Cable Length: 8.0 meters (26.2 feet); Connector Protector and Cable: Armored cable; Agency Approval: Not required. Do not change the calibrated total system length when replacing an extension or integral lead.
Match every connector, protector, armor or FluidLoc option and the receiving probe/Proximitor Sensor. Route the cable without sharp bends, crushing, connector side-load or contamination.
Inspect continuity and insulation where applicable, seat the connectors, compare channel bias with the recorded value and confirm stable vibration or position response before release.
