The Bently Nevada 330130-040-10-00 is an extension cable specifically designed for the 3300 XL series 8mm eddy current displacement sensors, manufactured by Bently Nevada (a brand under Baker Hughes). It is an indispensable intermediate connection hardware in the condition monitoring and protection circuits of large industrial rotating machinery (such as steam turbines, centrifugal compressors, and heavy-duty fans), responsible for transmitting shaft vibration, axial displacement, or critical phase velocity signals acquired by proximity probes at the bottom of the equipment over long distances to the preamplifier on the rack side, achieving extremely low attenuation and extremely high signal-to-noise ratio.
The Bently Nevada 330130-040-10-00 designation corresponds to an extremely stringent industrial-grade modular hardware selection configuration: 330130 represents the base platform model for the 3300 XL 8mm extension cable; the critical suffix -040 indicates a physical net cable length of 4.0 meters (13.1 feet), typically used in series with probes featuring 1.0-meter lead wires to fully match the 5.0-meter standard system length specified by the American Petroleum Institute (API) 670 standard; the following -10 indicates that this hardware upgrade is equipped with FluidLoc® anti-flow and oil-resistant triaxial cable with built-in connector protection sleeves to effectively prevent process lubricants from being drawn out through the cable core under internal pressure differentials; the final -00 indicates a standard general-purpose/uncertified configuration suitable for safe industrial server room environments free of special explosive gases.
The Bently Nevada 330130-040-10-00 cable features fluorinated ethylene propylene copolymer (FEP) insulation, offering exceptional physical toughness and a global supply chain guarantee. It can withstand harsh industrial environments ranging from -51°C to +177°C and lubricant immersion. The cable utilizes the patented CableLoc™ reinforced anchoring design, providing a tensile strength of up to 330 Newtons (75 psi) at the probe connector.
