Overview
Manuals
System Matching
Installation Planning
Ordering-Code Reference
Features:
- 3300 XL 8 mm extension cable: 330130-085-10-00 belongs to the documented manufacturer product family.
- Configuration: 8.5 m cable length option 085, FluidLoc cable option 10, and no agency approval option 00.
- Verification: Confirm the 330130-085-10-00 cable code, 8.5 m length, FluidLoc type, connectors, probe length, and sensor system length before replacement.
Bently Nevada 330130-085-10-00 is 8.5 m fluidloc proximity extension cable designed for Bently Nevada 3300 XL 8 mm proximity transducer systems. According to the official manufacturer documentation, it connects a compatible probe to the Proximitor Sensor while completing the specified total electrical length. The ordering identity records 8.5 m cable length option 085, FluidLoc cable option 10, and no agency approval option 00, so the complete suffix and nameplate information should be reviewed for a maintenance replacement, system extension, or critical spare.
Technical details for 330130-085-10-00 are limited to the applicable Baker Hughes Bently Nevada datasheet and official ordering information. Final suitability depends on the 3300 XL 8 mm probe, Proximitor Sensor, 9 m total electrical length, connector type, and FluidLoc requirement.
The Bently Nevada 330130-085-10-00 8.5 m FluidLoc proximity extension cable is supported by Moore Automated for verified industrial replacement and spare-part requirements.
Bently Nevada 330130-085-10-00 8.5 m FluidLoc proximity extension cable manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
System Matching
Confirm the 3300 XL 8 mm probe, Proximitor Sensor, 9 m total electrical length, connector type, and FluidLoc requirement. Compare the complete 330130-085-10-00 ordering code and nameplate data with the installed item before purchase.
Installation Planning
Follow the manufacturer instructions and verify minimum bend radius, connector cleanliness, cable routing, ClickLoc engagement, and total length calculation. Any cable, connector, housing, mounting hardware, or matched transducer component is separate unless listed in the quotation.
Ordering-Code Reference
8.5 m cable length option 085, FluidLoc cable option 10, and no agency approval option 00. Use the official ordering table to confirm every suffix, country approval, and custom MOD detail that applies.
