Overview
Manuals
Ordering Considerations
Installation Context
Machinery Monitoring
Features:
- 3300 XL Standard Extension Cable
- 3300 XL 8 mm Proximity Transducer System
- Provides an 8.0 m (26.2 ft) cable length for the 3300 XL 8 mm proximity transducer system
The Bently Nevada 330130-080-02-00 is a 3300 XL standard extension cable designed for use as a component of the complete 3300 XL 8 mm proximity transducer system. The model number breaks down as follows: 330130 designates the standard extension cable series; 080 indicates an 8.0-meter cable length; 02 signifies a standard cable with connector protectors; and 00 denotes a configuration requiring no agency approvals.
Within the 3300 XL 8 mm system, this extension cable works in conjunction with the proximity probe and Proximitor sensor to enable non-contact measurement of the operating state of rotating machinery. Bently Nevada notes that the system is capable of measuring both static position and dynamic vibration, while also supporting Keyphasor and speed measurement applications; the manufacturer also emphasizes the complete interchangeability of the probe, extension cable, and Proximitor sensor components.
The 330130-080-02-00 Bently Nevada Extension Cable may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330130-080-02-00 Extension Cable Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The most important configuration check is the total system length: Bently Nevada states that the selected extension-cable length plus the probe length must equal the total length specified for the Proximitor Sensor. For this model, the 8.0 m extension cable therefore needs to be selected together with a compatible probe and Proximitor Sensor configuration rather than treated as an isolated cable assembly.
The cable should be installed as part of the complete 3300 XL 8 mm transducer chain, with the probe, extension cable, and Proximitor Sensor selected as compatible system components. The manufacturer's interchangeable-system architecture allows a damaged cable or other component to be replaced without requiring individual component matching or bench calibration, simplifying maintenance of installed monitoring points.
In practical condition-monitoring installations, this extension cable forms part of the signal path used by the 3300 XL 8 mm eddy-current proximity system to obtain shaft-position and vibration information from rotating machinery. Bently Nevada also identifies Keyphasor and speed measurement as supported applications of the associated proximity transducer system.
