Overview
Manuals
Side-Exit Geometry
DE Range Setup
System-Length Check
Features:
- The smooth 1.06 in side-exit case and 3.0 in body length define the bracket-mounted mechanical form.
- A one-metre probe lead with stainless-steel armor protects the route while preserving the ordered electrical length.
- The matched 25 mm system provides a 12.7 mm linear range and nominal 0.787 V/mm scale for differential-expansion measurement.
Bently Nevada 330851-04-000-030-10-01-05 is a smooth side-exit 3300 XL 25 mm proximity probe intended for large-range turbine supervisory measurements. Case option 04 specifies a 1.06 in diameter smooth side-exit body, the 000 block is not used as an unthreaded length for this case, and 030 gives a 3.0 in overall case. Code 10 provides a 1.0 m probe length, armor option 01 adds stainless-steel armor and final option 05 identifies the multiple-approval version. In a correctly matched system, the 25 mm platform provides a 12.7 mm linear range with nominal 20 mV/mil scale. Its larger target requirement, sliding-bracket geometry, system-length components and differential-expansion calibration must be checked before replacement.
Manufacturer reference: official 3300 XL 25 mm Proximity Transducer System documentation.
Moore Automated supports exact-item verification and spare-part enquiries for 330851-04-000-030-10-01-05.
Bently Nevada 330851-04-000-030-10-01-05 Side-exit 25 mm proximity probe manual (Datasheet), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Verify the smooth 26.9 mm case, 3.0 in body and compatible sliding bracket before aligning the probe to the target.
Configure the matched 25 mm channel for the documented 12.7 mm range and 0.787 V/mm nominal scale.
Combine the one-metre probe with the correct extension cable and Proximitor Sensor to form the documented five- or nine-metre loop.
