Overview
Manuals
General Info
Ordering Information
Applications
Features:
- Electric Driven TK-3e
- TK3 Proximity System Test Kit
- Standard commercial baseline configuration, without special explosion-proof or hazardous area certifications from special agencies
The TK-3 Proximity System Test Kit simulates shaft vibration and position for calibrating Bently Nevada monitors. It verifies the operating condition of the monitor readouts as well as the condition of the proximity transducer system. A properly calibrated system ensures that the transducer inputs and the resulting monitor readings are accurate. The TK-3 uses a removable spindle micrometer assembly to check the transducer system and position monitor calibration. This assembly features a universal probe mount that will accommodate probe diameters from 5 mm to 19 mm (0.197 in to 0.75 in). The mount holds the probe while the user moves the target toward or away from the probe tip in calibrated increments and records the output from the Proximitor Sensor using a voltmeter.
Vibration monitors are calibrated using the motor-driven wobble plate. A swing-arm assembly located over the wobble plate holds the proximity probe in place. This assembly uses a universal probe mount, identical to that used with the spindle micrometer assembly. By using the absolute scale factor of the proximity probe in conjunction with a multimeter, the user adjusts the probe to find a position where the desired amount of mechanical vibration (as determined by peak-to-peak DC voltage output) is present. No oscilloscope is needed. The user can then compare a vibration monitor’s reading to the known mechanical vibration signal input viewed by the proximity probe. The mechanical vibration signal from the TK3 can range from 50 to 254 μm (2 to 10 mils) peak-to-peak.
The TK-3E 177313-02-02-00 Bently Nevada TK3 Proximity System Test Kit Electric Driven may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada TK-3E 177313-02-02-00 TK3 Proximity System Test Kit Electric Driven Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Model: TK-3E 177313-02-02-00
- Warranty: One-year warranty
- Condition: Brand new, original, in stock
- Product Family: TK3 Proximity System Test Kit
Electric Driven TK-3e
177313-Axx-Bxx-Cxx
A: Scale Units
01: English
02: Metric
B: Power Cord Type
01: American
02: European
03: Brazilian
C: Agency Approvals
00: None
Designed for industrial applications and reliability, the 177313-02-02-00 features a portable carrying case, combining portability and durability (approximately 5.22 kg net weight). Its enclosed design provides IP54 protection against dust, water, and harsh environments, perfectly meeting the needs of mobile monitoring and periodic metrological calibration in demanding environments such as oil, gas, petrochemical, and power generation.
