Overview
Manuals
Sensor Setup
Platform Review
Acceptance Test
Features:
- Eddy Current Signal Converter for the documented Emerson EPRO PR 642x.
- Measuring Range: 20.0mm (Extended Range).
- Linearity Error: ≤ 2.5%.
PR6426/00 CON011/916-200 belongs to the Emerson EPRO PR 642x and performs the documented eddy current signal converter role in the Emerson EPRO eddy-current measurement chain. The retained technical evidence records Measuring Range: 20.0mm (Extended Range); Linearity Error: ≤ 2.5%; Frequency Range (-3 dB): 0 to 20000 Hz. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Emerson EPRO PR 642x receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The PR6426/00 CON011/916-200 Eddy Current Signal Converter is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Emerson PR6426/00 CON011/916-200 Eddy Current Signal Converter Manual(Datasheets), Link
Important Notice: The linked document or internal product-family information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Sensor Setup: PR6426/00 CON011/916-200 performs the eddy current signal converter function within the Emerson EPRO PR 642x. The retained documentation identifies measuring range as 20.0mm (Extended Range); apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Platform Review: approve PR6426/00 CON011/916-200 only for the documented Emerson EPRO eddy-current measurement chain. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Acceptance Test: isolate the equipment, remove stored energy and inspect the receiving hardware before installing PR6426/00 CON011/916-200.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
