Overview
Manuals
Protection Logic
Revision Match
Service Review
Features:
- Termination Relay Card for the documented GE Mark V / Mark VIe Speedtronic.
- Relay Type: SPST.
- Power Supply Voltage: 125 V DC.
IS200TRPGH1BCC belongs to the GE Mark V / Mark VIe Speedtronic and performs the documented termination relay card role in the GE Speedtronic turbine-control architecture. The retained technical evidence records Relay Type: SPST; Power Supply Voltage: 125 V DC; CONTROL RELAY COIL VOLTAGE SUPPLY: 28 V. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the GE Mark V / Mark VIe Speedtronic receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The IS200TRPGH1BCC Termination Relay Card is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
GE IS200TRPGH1BCC Termination Relay Card Manual(Datasheets), Link
Important Notice: The linked document or internal product-family information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Protection Logic: IS200TRPGH1BCC performs the termination relay card function within the GE Mark V / Mark VIe Speedtronic. The retained documentation identifies relay type as SPST; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Revision Match: approve IS200TRPGH1BCC only for the documented GE Speedtronic turbine-control architecture. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Service Review: isolate the equipment, remove stored energy and inspect the receiving hardware before installing IS200TRPGH1BCC.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
