Overview
Manuals
Board Interface
Platform Fit
Service Checks
Features:
- Servo Control (VSVO) Board for the documented GE Mark V / Mark VIe Speedtronic.
- Frequency: 2 Hz.
- Off response time, maximum: 2 ms.
IS200VSVOH1BED belongs to the GE Mark V / Mark VIe Speedtronic and performs the documented servo control (vsvo) board role in the GE Speedtronic turbine-control architecture. The retained technical evidence records Frequency: 2 Hz; Off response time, maximum: 2 ms; Operating Temperature Range: -20°C to +60°C. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the GE Mark V / Mark VIe Speedtronic receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The IS200VSVOH1BED Servo Control (VSVO) Board is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
GE IS200VSVOH1BED Servo Control (VSVO) Board Manual(Datasheets), Link
Important Notice: The linked document or internal product-family information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Board Interface: IS200VSVOH1BED performs the servo control (vsvo) board function within the GE Mark V / Mark VIe Speedtronic. The retained documentation identifies frequency as 2 Hz; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Platform Fit: approve IS200VSVOH1BED only for the documented GE Speedtronic turbine-control architecture. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Service Checks: isolate the equipment, remove stored energy and inspect the receiving hardware before installing IS200VSVOH1BED.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
