Registered Address: 32D Floor Guomao Building, No.388, Hubin South Road, Siming District, Xiamen,Fujian, China

The General Electric QPK-3D200-S2P is a ge fanuc quickpanel for the GE QuickPanel platform. It provides a local operator interface for machine monitoring, status display and control. Confirm the complete model code, hardware revision, interfaces and supplied condition against the installed equipment before replacement.
Verify that the supplied item is marked QPK-3D200-S2P and that its ge fanuc quickpanel form, connectors and revision agree with the approved GE QuickPanel receiving record.
For QPK-3D200-S2P, state the required condition, quantity, installed position, connected assemblies and document requirements in the written enquiry.
Apply only parameters supported by the exact QPK-3D200-S2P record or a documented family source. Do not infer electrical ratings or interchangeability from appearance.
QPK-3D200-S2P technical scope: Input Voltage: 24 VDC; Current Consumption: 0.8 A; Power Consumption: ~15 W; Operating Temperature: 0°C to 50°C; Protection Rating: NEMA 4X / 12 (IP65 equivalent).
Use these values only for the listed hardware execution and verify the supplied label before installation.
Match QPK-3D200-S2P to the approved GE QuickPanel receiving position, connector or terminal arrangement and configuration record.
After power restoration, review diagnostics and test the affected ge fanuc quickpanel path.
Active / Available from OEM
QPK-3D200-S2P is a General Electric ge fanuc quickpanel associated with the GE QuickPanel platform. It supports the documented automation function assigned to its installed module, rack or cabinet position. Correct selection depends on the complete model code, connector or terminal arrangement, hardware revision and receiving-system configuration. Before replacement, compare the original product label, installed slot or cabinet reference, connected assemblies and approved project records. After installation, review system diagnostics and function-test every affected channel, control path, protection function or communication link before returning the equipment to service.