Registered Address: 32D Floor Guomao Building, No.388, Hubin South Road, Siming District, Xiamen,Fujian, China

Honeywell's 2025 System Hints identifies CC-SCMB05 as the enhanced memory-backup module required by CC-PCNT05 C300. It explicitly says older CC-SCMB02 is not compatible with PCNT05. Confirm the controller version, complete module label and migration procedure; the bulletins do not state module electrical ratings or packed size.
Honeywell's May 2025 System Hints lists a new enhanced memory backup module, CC-SCMB05, among the features of its CC-PCNT05 C300 controller. A separate January 2025 bulletin says PCNT05 needs this module and states that older CC-SCMB02 is not compatible. Together these direct manufacturer references establish the module's identity and a specific compatibility boundary. They are short system bulletins, not a complete CC-SCMB05 component datasheet. Controller-level temperature, processing, network and I/O figures elsewhere in the bulletins must not be transferred to the backup module.
For procurement, identify the installed controller version, current module label, Experion release, redundancy arrangement and applicable site migration plan. Ask the supplier to confirm the physical CC-SCMB05 and any included retention hardware against the quotation. Do not substitute CC-SCMB02 merely because it looks similar or served an earlier C300 execution. Before service, record the original configuration and follow the Honeywell procedure for safe controller maintenance. After installation, verify module recognition, alarms and the site's approved backup and recovery checks without creating an unplanned process interruption.
The May 2025 Honeywell bulletin calls CC-SCMB05 the new enhanced memory backup module for CC-PCNT05. This is an exact-model manufacturer statement. It identifies the role but does not quantify internal storage, electrical consumption or retention time. Check the complete supplied label and controller execution before ordering.
Honeywell's January 2025 System Hints says PCNT05 needs CC-SCMB05 and expressly states that older CC-SCMB02 is not compatible with PCNT05. Do not infer the reverse compatibility of CC-SCMB05 with older controllers. Confirm the installed C300 model, release and the approved upgrade or replacement procedure.
The linked official Honeywell bulletins establish the module's exact identity and the PCNT05 compatibility boundary. They do not publish exact backup duration, operating current, pack dimensions, gross weight or country of origin for the supplied spare. Such values require a component specification or actual-item evidence; none is invented here.
Use CC-SCMB05 only with an approved controller configuration. Honeywell's January 2025 bulletin says PCNT05 needs this memory backup module and rejects compatibility with older CC-SCMB02. Confirm the CC-PCNT05 nameplate, installed Experion release, controller role and physical backup-module interface against approved project documentation. The bulletin does not give a complete cross-generation substitution matrix, component electrical rating or specified retention duration.
Before touching a controller, record its current backup-module label, redundant pair arrangement, configuration state, alarms and recovery procedure. Follow site isolation and Honeywell service instructions to avoid an unplanned process interruption. After fitting a verified module, check recognition, diagnostics and the approved backup or restart behavior under a controlled commissioning plan. Do not treat C300 controller temperature, memory or I/O capacity figures as CC-SCMB05 component specifications.