Overview
Manuals
Identification Details
Feedback Application
Replacement Guidance
Features:
- AutoMax DPS feedback hardware
- DCC53120 primary assembly
- DCC2102 board configuration
- Encoder speed and position interface
- Revision-controlled replacement
Reliance Electric DCC53120 DCC2102 is an encoder feedback assembly used within the AutoMax Distributed Power System. The two printed codes identify the primary assembly and its board configuration.
The board supports closed-loop drive regulation by conveying encoder feedback to compatible control hardware. The exact board, connector, revision and regulator parameters must be matched during service.
The Reliance Electric DCC53120 DCC2102 may be supplied and supported by Moore Automated according to the stated manufacturer lifecycle and confirmed stock condition.
Reliance Electric DCC53120 DCC2102 Encoder Feedback Module Manuals(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, licenses and related items are not included with this equipment unless listed in the stock item description. All prices are shown in USD.
Identification Details:
- Primary code DCC53120
- Board code DCC2102
- AutoMax DPS hardware context
Treat both identifiers as mandatory when sourcing a replacement or verifying a spare.
Feedback Application:
- Encoder signal interface
- Motor speed feedback
- Position-related control feedback
Confirm encoder type, polarity, scaling and drive regulator configuration before commissioning.
Replacement Guidance:
- Use ESD-safe handling
- Match connectors and hardware revision
- Verify regulator parameters
This legacy board is not interchangeable solely by physical appearance; exact-code and configuration checks are required.
