Overview
Manuals
Contact Configuration
Coil Supply
Starter Verification
Features:
- Schneider Electric LC1D32F7C is a TeSys D three-pole contactor for switching motors and other industrial electrical loads. It combines the specified power-contact rating with an F7 control coil, so coil voltage, auxiliary-contact needs, utilization category and connected load must be confirmed before installation.
- Official LC1D32F7 base rating: 32 A AC-3 and 50 A AC-1.
- 110 V AC 50/60 Hz coil with 1 NO + 1 NC auxiliary contacts.
The public base record does not separately identify the C suffix; confirm the complete nameplate before replacement.
LC1D32F7 is a TeSys D three-pole contactor for switching motor and resistive loads within its published ratings. Coil voltage, auxiliary contact arrangement and the complete suffix determine whether the offered unit matches the installed control circuit.
Official source: Schneider Electric LC1D32F7 product record.
LC1D32F7C verified Moore Automated product resources.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The official LC1D32F7 base product uses three normally open main poles with 32 A AC-3 duty at up to 440 V AC and 50 A AC-1 duty.
The base record specifies a 110 V AC 50/60 Hz control coil. Confirm the supplied nameplate and C suffix before wiring.
Verify upstream protection, overload relay coordination, auxiliary-contact assignments and mechanical operation before returning the motor starter to service.
