Overview
Manuals
Control Strategy
Carrier Match
Commissioning
Features:
- CP343-1 Ethernet Communication Processor for the documented SIMATIC NET.
- transfer rate at the 1st interface: 10 ... 100 Mbit/s.
- type of electrical connection for power supply: 2-pole plugable terminal block.
6GK7343-1EX30-0XE0 belongs to the SIMATIC NET and performs the documented cp343-1 ethernet communication processor role in the Siemens SIMATIC industrial communication architecture. The retained technical evidence records transfer rate at the 1st interface: 10 ... 100 Mbit/s; type of electrical connection for power supply: 2-pole plugable terminal block; supply voltage: 24 V DC. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the SIMATIC NET receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The 6GK7343-1EX30-0XE0 CP343-1 Ethernet Communication Processor is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Siemens 6GK7343-1EX30-0XE0 CP343-1 Ethernet Communication Processor Manual(Datasheets), Link
Important Notice: The uploaded PDF documents 6GK7343-1EX30-0XE0 or its identified product family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Control Strategy: 6GK7343-1EX30-0XE0 performs the cp343-1 ethernet communication processor function within the SIMATIC NET. The retained documentation identifies transfer rate at the 1st interface as 10 ... 100 Mbit/s; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Carrier Match: approve 6GK7343-1EX30-0XE0 only for the documented Siemens SIMATIC industrial communication architecture. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Commissioning: isolate the equipment, remove stored energy and inspect the receiving hardware before installing 6GK7343-1EX30-0XE0.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
