Overview
Manuals
I/O Module Sizing
ET 200M Bus Layout
Removal and Insertion
Features:
- Two-module footprint: The bus module holds two I/O modules that are each 40 mm wide, providing the specified ET 200M installation arrangement.
- Service-oriented bus arrangement: Siemens identifies a removal-and-insertion function; the complete station determines the permissible maintenance procedure.
- Defined product-family boundary: The catalog places this component under IM 153-1/153-2 for SIMATIC ET 200M, supporting precise spare-part identification.
The 6ES7195-7HB00-0XA0 forms part of the physical bus arrangement in an ET 200M distributed I/O station. The exact-model data sheet specifies the supported two-module footprint, while the installed interface and signal modules determine the completed station's communication and field-I/O functions.
For replacement work, use the full order number and compare the existing module widths, neighboring bus components and approved station drawing. The removal-and-insertion description must be read with the system manual; it is not a blanket statement that any connected hardware can be removed under power.
Siemens lists 6ES7195-7HB00-0XA0 under PM400, announcement of product phase-out since 1 October 2023; the current exact-model data sheet designates it as a spare part. Moore Automated can quote the required replacement scope subject to stock and condition confirmation.
Siemens 6ES7195-7HB00-0XA0 product data sheet Manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Two specified module positions
The exact-model Siemens description specifies two I/O modules of 40 mm width each. Identify both installed I/O order numbers and their physical arrangement before selecting a replacement bus module; a shared ET 200 name does not establish interchangeability.
ET 200M assembly context
Siemens catalogs this bus module in the IM 153-1/153-2 product family. Check the existing interface module, neighboring bus modules and approved station layout as a complete assembly. This component is not an independent controller or communications adapter.
Removal and insertion boundary
The manufacturer identifies a removal-and-insertion function for the specified ET 200M arrangement. Any maintenance operation must follow the applicable system manual and the site's isolation procedure; this product description does not grant general live-replacement permission.
