Overview
Manuals
Probe Geometry
Cable Protection
Measurement Chain
Features:
- 12 mm non-contact eddy-current measurement range with an 18 mm sensor tip.
- A1-B1-C036-D000 identifies the standard M20 x 1.5 body and 36 mm geometry.
- E100-F1-G098-H10 defines the documented cable, protection and 10 m system-length execution.
TQ403 111-403-000-013 is a standard-mount high-temperature eddy-current proximity sensor for shaft relative vibration and gap or axial-position measurement. The complete A1-B1-C036-D000-E100-F1-G098-H10 code defines the environment, M20 x 1.5 body, 36 mm geometry, integral cable, protective hose and 10 m measurement-chain execution. Selection must also match the documented EA403 extension cable, IQS900 signal conditioner, target material and monitoring-channel scaling.
Before removal, record the installed probe gap, mounting depth, locknut position, cable and hose routing, connector condition and every associated channel setting. Reproduce the mechanical position and measurement-chain components from the controlled machine record rather than from appearance or a shortened part number. After installation, verify gap voltage, polarity, linear response, channel diagnostics, alarm settings and every affected machinery-protection path before returning the equipment to service.
The Vibro-Meter TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10 12 mm proximity sensor may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Vibro-Meter TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10 documentation and reference links.
Important Notice: Confirm the complete order code, measurement-chain components, machine installation and required document revision before replacement.
The B1-C036-D000 codes identify an M20 x 1.5 standard-mount body, 36 mm body length and 0 mm unthreaded length. Confirm clearance, probe engagement and target position before installation.
E100-F1-G098 specifies the 10 m integral cable with flexible stainless-steel hose protection and a 9.8 m hose-length code. Preserve bend radius, routing and connector condition.
Use TQ403 only with the documented EA403 extension cable and IQS900 signal conditioner configuration. The full chain length, sensitivity, target material and monitoring-channel scaling must match.
