Overview
Manuals
System Matching Requirements
Features:
- Non-contact measurement system based on eddy-current principle
- Conforms to API 670 recommendations
- Temperature-compensated design
Vibro-Meter's core business is providing high-end condition monitoring and machinery protection systems for critical industries worldwide, including aerospace, power generation, heavy industry, and the oil and gas sector. Its product line encompasses high-performance dynamic pressure sensors, vibration sensors, bearing vibration monitoring probes, and fully automated data acquisition and diagnostic systems.
Its systems reliably acquire extremely subtle physical change data in harsh field environments, such as ultra-high temperatures above 500°C, extremely high mechanical shocks, and potentially explosive atmospheres. These complex physical signals are then transformed into intuitive machine condition analyses through central monitoring software.
The TQ402 111-402-000-013 S3960 A1-B1-C042-D000-E010-F0-G000-H10 Vibro-Meter Non-contact eddy current proximity sensor may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Vibro-Meter TQ402 111-402-000-013 S3960 A1-B1-C042-D000-E010-F0-G000-H10 Non-contact eddy current proximity sensor manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Because this probe is cut and electrically balanced for a 10-meter system length (H10), it cannot be directly connected to a standard 5-meter loop, as this would result in significant calibration and tracking errors. To build a complete monitoring chain, it must be used with the following components: a matched 9-meter EA402 extension cable (1-meter integrated probe + 9-meter extension cable = total system loop length 10 meters); and a vibro-meter® IQS450 or the newer IQS900 signal conditioner specifically designed for calibrating 10-meter operating loops.
