Overview
Manuals
HI Safety Architecture
Resource Limits
SM812 & I/O Pairing
Features:
- PM867K01 is the 3BSE076355R1 processor package, using a 133 MHz MPC866 with 64 MB total RAM and 46.559 MB for the application.
- The High Integrity design is certified for SIL3 use when configured under ABB's Safety Manual and the stated 800xA 6.0.2 and later engineering environment.
- CPU redundancy is supported with a maximum 10 ms switchover; the redundant layout uses 7 optical clusters and the complete kit or matching partner hardware must be verified.
PM867K01 3BSE076355R1 is an ABB AC 800M high integrity processor unit built around the PM867 CPU. Its MPC866 runs at 133 MHz with 64 MB RAM and 46.559 MB available to the application. The documented package comprises PM867 CPU, TP830, TB850, TB807, TB852 and memory-backup battery; no license. ABB classifies the CPU as a High Integrity controller for SIL3 safety and combined control-and-safety configurations. Certified use requires the associated safety module, approved libraries and engineering restrictions described in the Safety Manual. The 24 VDC processor supports up to 12 CEX-bus modules. Local I/O uses 1 electrical + 7 optical clusters in single operation and 7 optical in a redundant arrangement, subject to 96 / 84 I/O modules. Control Network communication is provided through 2 x 10 Mbit/s RJ45 using MMS and IAC. Selection must preserve 800xA 6.0.2 and later, the installed project, CPU generation, partner hardware and bus topology.
Before replacing PM867K01 3BSE076355R1, record the installed position, hardware revision, mounting or connector arrangement, paired assemblies and every applicable ABB service record. Compare the supplied unit with the original item and approved configuration, isolate all relevant energy sources, and follow the documented installation procedure. After installation, inspect every affected mechanical, electrical and communication interface and complete controlled functional checks before returning the equipment to service.
The PM867K01 3BSE076355R1 ABB High Integrity processor unit is listed as Active / Available from OEM. Current revision, availability and supplied scope are confirmed in the written quotation.
ABB PM867K01 3BSE076355R1 High Integrity processor unit manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The PM867K01 3BSE076355R1 package contains PM867 CPU, TP830, TB850, TB807, TB852 and memory-backup battery; no license. Check the order number and every supplied item because a bare CPU or a different K01 generation is not the same product scope.
Each PM867 CPU uses a 133 MHz MPC866 with 64 MB RAM and 46.559 MB application space. The 0.09 ms Boolean benchmark is not the complete process-loop response time.
The processor accepts up to 12 CEX-bus modules and uses 1 electrical + 7 optical clusters in single operation. The redundant layout is 7 optical; apply the 96 / 84 I/O modules limit and verify 800xA 6.0.2 and later.
