Overview
Manuals
Connector Orientation
Pressure-Boundary
Channel Recommissioning
Features:
- Dual triaxial high-pressure feedthrough assembly identified by the full multi-group 330162 ordering code.
- Provides female connections on the probe side and male connections on the Proximitor side for two documented signal paths.
- Pressure-boundary drawing, seals, orientation, cable sections and channel assignments must all match the installed 3300 system.
330162-03-45-45-45-05-05-94-01-02 Bently Nevada 330162-03-45-45-45-05-05-94-01-02 is a dual triaxial high-pressure feedthrough assembly for two documented 3300 proximity-transducer paths. The assembly carries the cable connections across an engineered pressure boundary, with female connections on the probe side and male connections on the Proximitor side. Because the ordering identity contains multiple configuration groups, the complete code, penetration drawing, sealing components, orientation, cable sections and channel assignments must all be verified before replacement.
Official source: Bently Nevada 3300 high-pressure feedthrough assembly documentation identifies the 330162 dual triaxial arrangement and its probe-side female and Proximitor-side male connections.
330162-03-45-45-45-05-05-94-01-02 technical documentation and verified Moore Automated resources.
Important Notice: Confirm the pressure-boundary drawing, complete code and both connector paths before installation.
Keep each female probe-side connection paired with its assigned male Proximitor-side connection. Mark both signal paths before disconnecting the installed assembly.
Inspect the penetration, sealing components and mating surfaces against the engineered drawing. Pressure-boundary acceptance must follow the site and manufacturer procedure.
After installation, check continuity and isolation for both triaxial paths, reconnect the matched transducer components and verify both monitoring-channel responses before service.
