Overview
Manuals
Configuration
Insertion Geometry
Sealing and Commissioning
Features:
- All-metal external housing with aluminum body and 304 stainless-steel sleeve for protected reverse-mount probe installation.
- Option 28 identifies a 3300 XL 8 mm probe execution with multiple approvals, combined with 0.5 m cable and no standoff.
- Seven-inch penetration, fitting option 01 and 3/4-14 NPT mounting preserve the documented machine-casing geometry.
21000-28-05-00-070-01-02 Bently Nevada 21000-28-05-00-070-01-02 is an all-metal external proximity-probe housing assembly that protects and positions a reverse-mount probe at the machine casing. Option 28 selects a 3300 XL 8 mm probe execution with multiple approvals, while the remaining code specifies a 0.5 m cable, no standoff, 7.0 inch penetration, fitting option 01 and 3/4-14 NPT mounting. The housing, sleeve, sealing, conduit entry and matched transducer system must agree with the machine drawing.
Official source: Bently Nevada 21000 and 24701 Proximity Probe Housing Assemblies Datasheet 141600 identifies the ordering options and construction for this configuration.
21000-28-05-00-070-01-02 technical documentation and verified Moore Automated resources.
Important Notice: Confirm the complete housing code, transducer chain and machine interface before installation.
The probe option must remain associated with the full housing code. Verify the matched extension cable, Proximitor sensor, connector arrangement and monitor channel before replacement.
Confirm the 7.0 inch penetration, sleeve position and machine target clearance from the installation drawing. Maintain the documented probe orientation and casing thread.
Inspect fitting option 01, seals, conduit entry and cable route before tightening the housing. Set the probe gap and verify monitoring-channel response before return to service.
