Overview
Manuals
Extended Case Geometry
Five-Meter System
Gap and Cable Setup
Features:
- 3.3 in overall case
- 5.0 m total probe length
- 1/4-28 UNF, unarmored, option 05
Bently Nevada identifies 330171-00-33-50-01-05 as unarmored 1/4-28 unf 3300 5 mm proximity probe for Bently Nevada 3300 5 mm proximity transducer systems. The ordering code specifies 0.0 in unthreaded length, a 3.3 in overall case, 5.0 m total probe length, standard cable with ClickLoc connector protector, no armor and multiple approvals option 05. The 5 mm system provides a compact probe where mounting space is limited. Selection must be based on the complete ordering identity and installed hardware context because related models can differ in mechanical arrangement, interfaces, cable configuration, approvals or supported system generation.
Technical content is limited to Baker Hughes Bently Nevada 3300 5 mm Transducer System datasheet 172036 Revision T. Final suitability is confirmed against the installed unit, nameplate and system records.
The Bently Nevada 330171-00-33-50-01-05 unarmored 1/4-28 UNF 3300 5 mm proximity probe is supported by Moore Automated for verified industrial replacement and spare-part requirements.
Bently Nevada 330171-00-33-50-01-05 unarmored 1/4-28 UNF 3300 5 mm proximity probe manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Extended Case Geometry
The complete code defines 0.0 in unthreaded length, a 3.3 in case, 5.0 m cable, connector protector and approvals.
Five-Meter System Review
Match the probe to the correct extension cable and Proximitor Sensor so the required total electrical length is preserved.
Gap and Cable Setup
Confirm 1/4-28 thread engagement, initial probe gap, cable bend radius and clean ClickLoc connection before commissioning.
