Overview
Manuals
5 mm Probe Options
Compact Machine Fit
Gap Setup
Features:
- The documented thread is 1/4-28 UNF-2A; confirm the installed mounting interface, available reach and mechanical clearance before replacement.
- The documented armor configuration is No; preserve this construction together with the complete order code and cable-routing requirements.
- The documented unthreaded length is 0.0 in; confirm the installed mounting interface, available reach and mechanical clearance before replacement.
330171-00-20-90-12-05 is a Bently Nevada Transducer Cable for the 3300 system. It connects the probe to a compatible Proximitor Sensor. Key specifications: Thread: 1/4-28 UNF-2A; Armor: No. Match the full order code and hardware before replacement.
This 5 mm probe has a 9.0 m FluidLoc integral cable, 2.0-inch threaded case and option-05 approvals. Use a length-matched 3300 XL Proximitor Sensor, limit 1/4-28 thread engagement to 0.375 inch, use at least a #3 tap drill, and retain the 25.4 mm minimum cable bend radius.
The exact 330171-00-20-90-12-05 execution must be confirmed by its complete order code, condition, connected 3300 system and included scope before purchase or replacement.
Bently Nevada 330171-00-20-90-12-05 3300 5 mm proximity probe with 9 m FluidLoc cable and hazardous-area approvals manual (Datasheet), Link
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Preserve every option block of 330171-00-20-90-12-05. Retained facts: Thread: 1/4-28 UNF-2A; Armor: No; Unthreaded length: 0.0 in. Mechanical length, thread, cable/connector and approval suffixes are part of the exact probe identity.
Match probe family, electrical length, extension cable and Proximitor Sensor. Confirm target material, available travel, nearby probe spacing and mounting geometry before exchange.
Set the operating gap from live bias voltage, support the cable above its bend limit and verify runout, vibration or position response against the commissioning baseline.
