Overview
Manuals
System Matching
Installation Planning
Ordering-Code Reference
Features:
- 3300 5 mm: 330171-00-08-10-01-05 belongs to the documented manufacturer product family.
- Configuration: 0.0 in unthreaded length, 0.8 in case, 1.0 m total cable, standard cable with connector protector option 01, no armor, and approvals option 05.
- Verification: Confirm all 00-08-10-01-05 suffixes, unarmored construction, case, cable, connector, and total system length before replacement.
Bently Nevada 330171-00-08-10-01-05 is unarmored 1/4-28 unf proximity probe designed for Bently Nevada 3300 5 mm proximity transducer systems. According to the official manufacturer documentation, it provides compact non-contact shaft vibration and position measurement in installations where an 8 mm probe will not fit. The ordering identity records 0.0 in unthreaded length, 0.8 in case, 1.0 m total cable, standard cable with connector protector option 01, no armor, and approvals option 05, so the complete suffix and nameplate information should be reviewed for a maintenance replacement, system extension, or critical spare.
Technical details for 330171-00-08-10-01-05 are limited to the applicable Baker Hughes Bently Nevada datasheet and official ordering information. Final suitability depends on the 3300 XL extension cable, compatible Proximitor Sensor, electrical length, target, thread, and approvals.
The Bently Nevada 330171-00-08-10-01-05 unarmored 1/4-28 UNF proximity probe is supported by Moore Automated for verified industrial replacement and spare-part requirements.
Bently Nevada 330171-00-08-10-01-05 unarmored 1/4-28 UNF proximity probe manual(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
System Matching
Confirm the 3300 XL extension cable, compatible Proximitor Sensor, electrical length, target, thread, and approvals. Compare the complete 330171-00-08-10-01-05 ordering code and nameplate data with the installed item before purchase.
Installation Planning
Follow the manufacturer instructions and verify 1/4-28 thread engagement, probe gap, cable routing, connector protection, and matched system length. Any cable, connector, housing, mounting hardware, or matched transducer component is separate unless listed in the quotation.
Ordering-Code Reference
0.0 in unthreaded length, 0.8 in case, 1.0 m total cable, standard cable with connector protector option 01, no armor, and approvals option 05. Use the official ordering table to confirm every suffix, country approval, and custom MOD detail that applies.
