Overview
Manuals
ETR Cable Options
Temperature Fit
Hot-Service Checks
Features:
- The documented cable length is 8.0 meters (26.2 feet); retain this dimension when checking mounting geometry, routing and compatibility with the installed hardware.
- The documented cable option is Standard cable; verify the connector interface, electrical length and matching 3300 signal-chain components before commissioning.
- The documented agency approval option is CSA, ATEX, IECEx Approvals; the complete approval suffix must match the installation area and site requirements.
330190-080-00-05 is a Bently Nevada 3300 XL Extended Temperature Range (ETR) extension cable for the 3300 system. It connects the probe to a compatible Proximitor Sensor. Key specifications: Cable Length: 8.0 meters (26.2 feet); Cable Option: Standard cable. Match the full order code and hardware before replacement.
The technical specifications for this model are clearly defined: "330190" designates the base series for the 3300 XL 8mm system high-temperature extension cable; the core suffix "-080" specifies an exact electrical length of 8.0 meters (26.2 feet), which—when paired with a 1.0-meter probe—precisely meets the 9.0-meter total system impedance balance required by the API 670 international standard; "-00" indicates a standard flexible jacket design without external armor; and the final suffix "-05" signifies that the assembly has obtained high-level explosion-proof safety certifications across multiple regions and standards, including CSA, ATEX, and IECEx.
The exact 330190-080-00-05 execution must be confirmed by its complete order code, condition, connected 3300 system and included scope before purchase or replacement.
Bently Nevada 330190-080-00-05 3300 XL Extended Temperature Range (ETR) extension cable manual (Datasheet), Link
Important Notice: Confirm the complete order code, hardware execution and connected system before replacement. Accessories, cables, calibration data, software and certificates are included only when stated in the written quotation.
Review 330190-080-00-05 by complete length and construction code. Retained facts: Cable Length: 8.0 meters (26.2 feet); Cable Option: Standard cable; Agency Approval Option: CSA, ATEX, IECEx Approvals. Do not change the calibrated total system length when replacing an extension or integral lead.
Match every connector, protector, armor or FluidLoc option and the receiving probe/Proximitor Sensor. Route the cable without sharp bends, crushing, connector side-load or contamination.
Inspect continuity and insulation where applicable, seat the connectors, compare channel bias with the recorded value and confirm stable vibration or position response before release.
