Overview
Manuals
Loop Function
Hardware Context
Loop Testing
Features:
- Analog Output Module for the documented Emerson DeltaV.
- System Power: 24 VDC @ 300 mA.
- AC Output Signal: AC Signal Power: 250VAC, 500VA/Ch, 1440VA/card.
KC3020X1-BA1 12P6732X092 belongs to the Emerson DeltaV and performs the documented analog output module role in the Emerson DeltaV distributed control system. The retained technical evidence records System Power: 24 VDC @ 300 mA; AC Output Signal: AC Signal Power: 250VAC, 500VA/Ch, 1440VA/card; DC Output Signal: DC Signal Power: 150VDC, 80W/Ch, 1280W/card. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Emerson DeltaV receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The KC3020X1-BA1 12P6732X092 Analog Output Module is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Emerson KC3020X1-BA1 12P6732X092 Analog Output Module Manual(Datasheets), Link
Important Notice: The linked document or internal product-family information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Loop Function: KC3020X1-BA1 12P6732X092 performs the analog output module function within the Emerson DeltaV. The retained documentation identifies system power as 24 VDC @ 300 mA; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Hardware Context: approve KC3020X1-BA1 12P6732X092 only for the documented Emerson DeltaV distributed control system. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Loop Testing: isolate the equipment, remove stored energy and inspect the receiving hardware before installing KC3020X1-BA1 12P6732X092.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
