Overview
Manuals
Processor Setup
Platform Match
Release Checks
Features:
- PLC CPU Module for the documented GE Fanuc Series 90-30.
- Serial port: RS-485 (via power supply.
- User memory: 240K Bytes.
IC693CPU364-EK belongs to the GE Fanuc Series 90-30 and performs the documented plc cpu module role in the GE Fanuc Series 90-30 PLC architecture. The retained technical evidence records Serial port: RS-485 (via power supply; User memory: 240K Bytes; Operating temperature: 0°C to 60°C. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the GE Fanuc Series 90-30 receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The IC693CPU364-EK PLC CPU Module is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
GE IC693CPU364-EK PLC CPU Module Manual(Datasheets), Link
Important Notice: No verified exact-model PDF was available when this page was reviewed. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Processor Setup: IC693CPU364-EK performs the plc cpu module function within the GE Fanuc Series 90-30. The retained documentation identifies serial port as RS-485 (via power supply; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Platform Match: approve IC693CPU364-EK only for the documented GE Fanuc Series 90-30 PLC architecture. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Release Checks: isolate the equipment, remove stored energy and inspect the receiving hardware before installing IC693CPU364-EK.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
