Overview
Manuals
Functionality
Hardware & System Interface
Compatibility & Replacement
Features:
- Product Type: High speed counter module 200KHZ A B and C type, enhanced mode up to 1MHz with 2MHz internal oscillator
- Exact hardware identity: IC694APU300
- Documented hardware type: High speed counter module 200KHZ A B and C type, enhanced mode up to 1MHz with 2MHz internal oscillator
The IC694APU300 General Electric high speed counter module 200khz a b and c type, enhanced mode up to 1mhz with 2mhz internal oscillator performs the documented automation duty assigned to its installed module or cabinet position within the PACSystems RX3i platform. Its value in an operating plant comes from preserving the intended relationship between the installed hardware, connected field equipment and the approved control-system configuration. Using the complete model identity helps maintenance teams avoid connector, channel-allocation and hardware-execution mismatches during replacement.
Before installing IC694APU300, compare the full product label, installed position, terminal or connector arrangement, paired assemblies and available project records. Retain required firmware, logic, settings and channel assignments, then review diagnostics and function-test every affected path before returning the equipment to service. The supplied condition, exact revision and included accessories should be confirmed in the written quotation.
The IC694APU300 General Electric High speed counter module 200KHZ A B and C type, enhanced mode up to 1MHz with 2MHz internal oscillator is listed as Active / Available from OEM. Current revision, availability and supplied scope are confirmed for the written quotation.
General Electric IC694APU300 documentation and reference links.
Important Notice: The linked information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement.
IC694APU300 is applied as a high speed counter module 200khz a b and c type, enhanced mode up to 1mhz with 2mhz internal oscillator in the PACSystems RX3i platform and performs the documented automation duty assigned to its installed module or cabinet position. The retained product record identifies Product Type: High speed counter module 200KHZ A B and C type, enhanced mode up to 1MHz with 2MHz internal oscillator; Exact hardware identity: IC694APU300; Documented hardware type: High speed counter module 200KHZ A B and C type, enhanced mode up to 1MHz with 2MHz internal oscillator.
Actual operating behavior depends on the receiving hardware, connected equipment, firmware or configuration and the approved project design. Confirm the exact execution before transferring wiring, settings or logic.
For IC694APU300, review the installed high speed counter module 200khz a b and c type, enhanced mode up to 1mhz with 2mhz internal oscillator position in the PACSystems RX3i system, including connector keying, terminal allocation, field wiring, grounding, power sources and any carrier or backplane interface.
Record the original installation before removal. After replacement, inspect diagnostics and verify every affected signal, command, protection action or communication path under controlled operating conditions.
Lifecycle stage: Active / Available from OEM
Do not assume that another revision directly replaces IC694APU300. Match the complete model code, high speed counter module 200khz a b and c type, enhanced mode up to 1mhz with 2mhz internal oscillator hardware execution and PACSystems RX3i receiving-system requirements. State the required condition, quantity, installed position and documentation scope in the enquiry.
Moore Automated confirms the supplied item identity, condition, included accessories and available documentation in the written quotation before dispatch.
