Overview
Manuals
Identity Evidence
Order Controls
Technical Boundary
Features:
- Exact listed identity: IC694APU300
- Documented hardware type: High speed counter module 200KHZ A B and C type, enhanced mode up to 1MHz with 2MHz internal oscillator
- Receiving product platform: PACSystems RX3i
Product description:
IC694APU300 is a General Electric high speed counter module 200khz a b and c type, enhanced mode up to 1mhz with 2mhz internal oscillator associated with the PACSystems RX3i platform. It supports the documented automation function assigned to its installed module, rack or cabinet position. Correct selection depends on the complete model code, connector or terminal arrangement, hardware revision and receiving-system configuration. Before replacement, compare the original product label, installed slot or cabinet reference, connected assemblies and approved project records. After installation, review system diagnostics and function-test every affected channel, control path, protection function or communication link before returning the equipment to service.
Selection and installation:
Use IC694APU300 only where the installed equipment record identifies the same high speed counter module 200khz a b and c type, enhanced mode up to 1mhz with 2mhz internal oscillator and PACSystems RX3i receiving platform. Confirm mechanical fit, keying, field wiring, power requirements, firmware or logic dependencies and any paired carrier or terminal assembly. Do not treat a visually similar unit or a shortened model code as proof of interchangeability.
Verification before service:
Record the supplied IC694APU300 label, installed position and test results. Release the equipment only after the affected control and safety functions operate as required.
General Electric IC694APU300 documentation and reference links.
Important Notice: The linked information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement.
Verify that the supplied item is marked IC694APU300 and that its high speed counter module 200khz a b and c type, enhanced mode up to 1mhz with 2mhz internal oscillator form, connectors and revision agree with the approved PACSystems RX3i receiving record.
For IC694APU300, state the required condition, quantity, installed position, connected assemblies and document requirements in the written enquiry.
Apply only parameters supported by the exact IC694APU300 record or a documented family source. Do not infer electrical ratings or interchangeability from appearance.
