Overview
Manuals
Module Identity
Optical Interface
Service Verification
Features:
- Honeywell lists CC-FMMX01 as an optional multi-mode fiber optic module for CF9.
- The reviewed guide specifies MT-RJ, 1300 nm and 62.5/125 multimode dielectric fiber.
- The OEM reference table gives a 2 km maximum distance and approximately 1 W power.
The Honeywell-authored Release 501 Control Firewall User's Guide distinguishes the optional CC-FMMX01 multi-mode optical module from CC-FSMX01, its separate single-mode counterpart. For CC-FMMX01, the fiber-media table names an orange single-jacketed dual-fiber cable, MT-RJ connector, 62.5/125 multimode dielectric fiber, 1300 nm wavelength and a 2 km maximum reference distance. The following page continues with 3.3 V, industrial -40 C to +85 C, SFF form factor and approximately 1 W. These are the reviewed OEM table values, not assumptions from a neighboring product.
The guide also lists CC-FMMX01 as an optional spare component for the Control Firewall system. Before replacement, confirm the exact CF9 IOTA and port, existing optical module marking, cable medium, connector style, route loss and approved network topology. Qualified personnel should observe the manufacturer's ESD and hazardous-location cautions and the site's change-control rules when working on the firewall. Record link state before service and verify expected FTE communications, alarms and redundancy after the correct optical module is installed. The 2018 guide is a technical reference, not a current support or lifecycle notice.
The CC-FMMX01 Honeywell Multi-Mode Fiber Optic Module may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Honeywell CC-FMMX01 official technical documentation and product links.
This multi-page Honeywell technical document contains the exact model and its technical data. Apply the values to the supplied type number and verify its revision before installation.
Honeywell's guide names CC-FMMX01 as a Multi-Mode Fiber Optic Module and lists it as an optional CF9 spare. The prior site descriptor treated it as a cable or connector assembly, which conflated the optical module with its required fiber cable. Confirm the full marking and the installed firewall IOTA port before ordering.
The cited OEM table specifies 62.5/125 multimode dielectric fiber, 1300 nm wavelength, MT-RJ connector and a maximum reference distance of 2 km. It also gives 3.3 V, an industrial -40 C to +85 C temperature range, SFF form factor and approximately 1 W. Apply the values only to the documented optical module and verify path engineering for the installed network.
Before changing a Control Firewall fiber interface, record link health, alarms, port assignment and network topology. Use qualified site controls, ESD protection and the guide's hazardous-location cautions. After fitting the exact approved module and media, verify FTE link recovery and expected control communications. The reviewed guide does not establish a blanket live-swap procedure or present-day lifecycle status.
