Overview
Manuals
Exact Part Mapping
FTA Electrical Role
Safe Selection
Features:
- Honeywell HPM Planning maps MU-TDOA13 directly to non-CE part 51304648-100.
- Honeywell IO03-684 describes 16 independent 120/240 Vac solid-state digital-output channels.
- The FTA table specifies normally open triac output switching and compression terminal execution.
In Honeywell HPM Planning table 7-4, MU-TDOA13 is a 120/240 Vac solid-state digital-output FTA with non-CE part number 51304648-100. The same row assigns 51304648-125 to the CE-compliant version, so those numbers must not be silently merged. Other Honeywell HPM Planning tables identify MU-TDOA13 as a compression-terminal assembly and show 16 output points. The TPS Process Manager I/O specification associates the FTA with the separate MU-PDOX02 digital-output processor and lists MU-TDOA13 in the 120/240 Vac FTA column. This is termination hardware, not an autonomous control or output-processing module.
Honeywell's IO03-684 table describes 16 independent output channels, normally open triac switching, 120/240 Vac load service, a 50 mA rms minimum load and 5 mA rms maximum off-state leakage for the 120/240 Vac FTA family. It also gives fuse, current and load-power-factor qualifications that must be read together with the table footnotes and the applicable installation manual. Do not treat a single headline current figure as permission to connect any load. Check the plant's exact output processor, wiring drawings, power source, terminal condition, fuse specification, load type and regulatory requirements against current Honeywell instructions before replacement.
The MU-TDOA13 51304648-100 Honeywell HPM 120/240 Vac Digital-Output FTA may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Honeywell MU-TDOA13 51304648-100 official technical documentation and product links.
This multi-page Honeywell technical document contains the exact model and its technical data. Apply the values to the supplied type number and verify its revision before installation.
Honeywell HPM Planning table 7-4 prints MU-TDOA13 beside 51304648-100 in the non-CE part-number column. The same model row lists 51304648-125 under CE-compliant part number. This confirms the full website identity without borrowing a number from a neighboring model, but the physical supplied label and applicable approval still need checking. Do not substitute the CE and non-CE versions solely because the model prefix matches.
The Honeywell IO03-684 specification places MU-TDOA13 in the 120/240 Vac solid-state output FTA group for a 16-point process output processor. Its 16 channels are independent and use normally open triac switches. The FTA provides field termination and power-switching paths; the separate processor and control configuration provide the output commands. Consult the table footnotes and installation instructions for load-current, fuse, power-factor and wiring conditions.
Before procurement, record the installed FTA part marking, compression-terminal execution, associated MU-PDOX02 processor, cabinet position and all field load details. Compare the active system drawing with the actual wiring and approval requirements. Honeywell's older manuals establish historical catalog identity and electrical category; they are not a current stock certificate or proof that a particular revision is interchangeable in every installed cabinet. Final supply and shipment details require written confirmation.
