Overview
Manuals
MOVIMOT Setup
Motor Match
Drive Validation
Features:
- MM15D-503-00 is identified by motor power code 15 = 1.5 kW within the documented MOVIMOT MM..D decentralized drives configuration.
- The official specification gives series version as D, which must be retained during selection.
- Commissioning must also preserve supply voltage code (50 = 380-500 VAC) and the stated connection limits.
A MOVIMOT D-series decentralized frequency inverter sized for a 1.5 kW motor and 380-500 VAC three-phase supply. The type code identifies D version, voltage class 50, three-phase connection code 3 and standard version 00. Selection must preserve the complete label identity, connected-equipment compatibility and manufacturer installation limits.
Manufacturer reference: official MOVIMOT MM..D decentralized drives documentation.
Moore Automated supports exact-item verification and spare-part enquiries for MM15D-503-00.
No public single-model PDF was located for MM15D-503-00; use the verified related internal resource before requesting exact documentation, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Confirm the complete MM15D-503-00 identity and compare motor power code, series version and supply voltage code with the installed design before approving a replacement.
Match the SEW motor, winding connection, brake, MOVIMOT connection box, fieldbus/interface module and any motor-close mounting adapter. The base code alone does not define every assembled drive option.
Record all switch and parameter settings, isolate line and DC-link energy, reproduce motor/brake wiring and option interfaces, verify rotation and current limits, then commission the drive under controlled load.
