Overview
Manuals
Loop Setup
Platform Match
Release Checks
Features:
- 5 mm/8 mm Proximitor sensor for the documented Bently Nevada 3300 Proximitor sensors.
- Device Type: 3300 XL 5 mm/8 mm Proximitor Sensor.
- Product Family: 3300 XL 8 mm Proximity Transducer System.
330180-91-05 belongs to the Bently Nevada 3300 Proximitor sensors and performs the documented 5 mm/8 mm proximitor sensor role in the Bently Nevada proximity measurement system. The retained technical evidence records Device Type: 3300 XL 5 mm/8 mm Proximitor Sensor; Product Family: 3300 XL 8 mm Proximity Transducer System; System Component: 5 mm/8 mm Proximitor sensor. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Bently Nevada 3300 Proximitor sensors receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The 330180-91-05 5 mm/8 mm Proximitor sensor is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Bently Nevada 330180-91-05 5 mm/8 mm Proximitor sensor Manual(Datasheets), Link
Important Notice: The linked document or internal product-family information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Loop Setup: 330180-91-05 performs the 5 mm/8 mm proximitor sensor function within the Bently Nevada 3300 Proximitor sensors. The retained documentation identifies device type as 3300 XL 5 mm/8 mm Proximitor Sensor; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Platform Match: approve 330180-91-05 only for the documented Bently Nevada proximity measurement system. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Release Checks: isolate the equipment, remove stored energy and inspect the receiving hardware before installing 330180-91-05.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
