Overview
Manuals
Basic Info
Ordering Information
Spare Parts Maintenance
Features:
- SINAMICS S120
- SINAMICS S120 CU310 DP Control Unit
- 6SL3040-0LA00-0AA1 Siemens article / order number
- Product family: SINAMICS S120
The Siemens 6SL3040-0LA00-0AA1 is a SINAMICS S120 CU310 DP Control Unit for single-axis drive tasks. It provides the PROFIBUS-based control and coordination functions for a compatible SINAMICS S120 power module and uses a CompactFlash card to hold firmware and drive parameters.
The CU310 DP supports drive commissioning, setpoint processing, status and diagnostic communication, encoder evaluation, and motor-temperature monitoring. Siemens documentation identifies encoder signal support through X23 and KTY/PTC temperature channels through X120 and X23, with channel availability dependent on the hardware and firmware version.
Siemens cancelled 6SL3040-0LA00-0AA1 in October 2013 and the later CU310-2 DP 6SL3040-1LA00-0AA0 is the corresponding successor generation. Replacement requires verification of the CompactFlash card, firmware level, PROFIBUS configuration, power-module compatibility, encoder wiring, DRIVE-CLiQ topology, and parameter backup before commissioning.
The 6SL3040-0LA00-0AA1 Siemens SINAMICS S120 CU310 DP Control Unit may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6SL3040-0LA00-0AA1 SINAMICS S120 CU310 DP Control Unit Manuals/Datasheets/Link
Important Notice: Other accessories, manuals, cables, calibration data, software, licenses, memory media and accessories are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Product Information:
The Siemens 6SL3040-0LA00-0AA1 is a SINAMICS S120 CU310 DP Control Unit for single-axis drive tasks. It provides the PROFIBUS-based control and coordination functions for a compatible SINAMICS S120 power module and uses a CompactFlash card to hold firmware and drive parameters.
The CU310 DP supports drive commissioning, setpoint processing, status and diagnostic communication, encoder evaluation, and motor-temperature monitoring. Siemens documentation identifies encoder signal support through X23 and KTY/PTC temperature channels through X120 and X23, with channel availability dependent on the hardware and firmware version.
Siemens cancelled 6SL3040-0LA00-0AA1 in October 2013 and the later CU310-2 DP 6SL3040-1LA00-0AA0 is the corresponding successor generation. Replacement requires verification of the CompactFlash card, firmware level, PROFIBUS configuration, power-module compatibility, encoder wiring, DRIVE-CLiQ topology, and parameter backup before commissioning.
Ordering Information:
Order the complete Siemens article number 6SL3040-0LA00-0AA1. Confirm the product family, hardware revision, interfaces, supply requirements and lifecycle status before purchase.
- Product family: SINAMICS S120
- Control Unit: CU310 DP
- Fieldbus interface: PROFIBUS
- Drive application: Single-axis drive control
- Memory medium: CompactFlash card required; not included
- Encoder interface: TTL, HTL and SSI via X23
- Temperature inputs: KTY or PTC channels via X120 and X23
- Product lifecycle: PM410 product cancellation
Spare Parts Maintenance:
6SL3040-0LA00-0AA1 is a SINAMICS S120 CU310 DP Control Unit with PROFIBUS for single-axis drive control. It requires a compatible CompactFlash card and matching power-module, encoder, temperature-sensor, firmware, and parameter configuration; Siemens lists the product as cancelled and the CU310-2 DP 6SL3040-1LA00-0AA0 as the successor generation.
Retain the original configuration, firmware or project backup where applicable, and compare connectors, mounting, voltage class and environmental limits before replacement.
