Overview
Manuals
Circuit Role
Architecture Fit
Validation Steps
Features:
- KTP900 Basic Color PN Panel for the documented SIMATIC HMI.
- Product type designation: KTP900 Basic color PN.
- Screen diagonal: 9 in.
6AV2123-2JB03-0AX0 belongs to the SIMATIC HMI and performs the documented ktp900 basic color pn panel role in the Siemens SIMATIC operator-panel architecture. The retained technical evidence records Product type designation: KTP900 Basic color PN; Screen diagonal: 9 in; Rated value (DC): 24 V DC. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the SIMATIC HMI receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The 6AV2123-2JB03-0AX0 KTP900 Basic Color PN Panel is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Siemens 6AV2123-2JB03-0AX0 KTP900 Basic Color PN Panel Manual(Datasheets), Link
Important Notice: The uploaded PDF documents 6AV2123-2JB03-0AX0 or its identified product family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Circuit Role: 6AV2123-2JB03-0AX0 performs the ktp900 basic color pn panel function within the SIMATIC HMI. The retained documentation identifies product type designation as KTP900 Basic color PN; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
Architecture Fit: approve 6AV2123-2JB03-0AX0 only for the documented Siemens SIMATIC operator-panel architecture. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Validation Steps: isolate the equipment, remove stored energy and inspect the receiving hardware before installing 6AV2123-2JB03-0AX0.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
