Fast Quote About Us FAQ Contact Us
  • Please try to be as accurate as possible with your search.
  • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
  • We can't find any results for “”.
    SEE MORE
      SEE PRODUCTS IN SEARCH PAGE ()
      Fast Quote About Us FAQ Contact Us
      Request a Parts Quote
      Name
      Company *
      Phone *
      Email *
      Address
      City
      State / Province / Region
      Zipcode
      Country
      Quantity *
      Part Number *
      Manufacturer
      Preferred Condition
      Additional Information
      Cancel
      Bently Nevada 330703-000-090-50-02-00
      Bently Nevada 330703-000-090-50-02-00
      · Product image is representative; revision or series may vary. Contact us to request a specific version.
      Get a Quote

      330703-000-090-50-02-00

      3300 XL 11 mm proximity probe
      In Stock
      Ships by Thursday, August 27
      Fast Shipping Available

      Product Information:

      330703-000-090-50-02-00 is a 3300 XL 11 mm proximity probe designed for non-contact measurement of shaft position and vibration where a wider linear range is required than the standard 8 mm system.

      The order code specifies an M14 x 1.5 threaded probe without armor, 0 mm unthreaded length, a 90 mm case, 5.0-meter total probe length, standard cable, no connector protector and no hazardous-area approval option.

      When matched with the correct 3300 XL 11 mm extension cable and Proximitor Sensor, the system provides a nominal 3.94 V/mm scale factor over a 4.0 mm linear range. Observe the official minimum target size and mechanical clearances during installation.

      Warranty Policy
      We provide 1-year warranty for all remaining parts.
      The warranty period is 1-year warranty from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
      Return Notice
      The warranty period is 1-year warranty from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
      In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
      Shipping Methods
      Various transportation options are available in each country. Shipping methods and fees are clearly indicated on all quotations.Various transportation options are available in each country. Shipping methods and fees are clearly indicated on all quotations.
      Parts Availability
      Moore Automated offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
      Expand All
      Collapse all

      Technical specifications for 330703-000-090-50-02-00

      • Manufacturer:
        Bently Nevada
      • Product Category:
        Sensor
      • Estimated shipping dimensions:
        9.0 x 1.4 x 500.0 cm
      • Weight:
        0.25 kg
      • Tariff Code:
        8537101190
      • Country of origin:
        USA
      • Place of shipment:
        Xiamen, Fujian, China
      • Manufacturer:
        Bently Nevada
      • Product family:
        3300 XL 11 mm Proximity Transducer System
      • Probe type:
        Proximity probe without armor
      • Probe thread:
        M14 x 1.5
      • Unthreaded length:
        0 mm
      • Case length:
        90 mm
      • Total probe length:
        5.0 m
      • Cable type:
        Standard cable
      • Connector protector:
        Not included
      • Approvals:
        No approvals, code 00
      • Linear range:
        4.0 mm
      • Scale factor:
        3.94 V/mm
      • Frequency response:
        0 to 8 kHz
      • Probe temperature range:
        -35 to +120 °C
      • Minimum target diameter:
        30.5 mm
      • Official document:
        Baker Hughes 146256
      • Stock:
        36
      Ask for Quote

      Alternative Names

      330703-000-090-50-02-00 330703000090500200 330703 000 090 50 02 00 330703-000-090-10-02-00 330703-000-090-90-02-00 330703-000-080-50-02-00 330703-000-100-50-02-00 330703-050-090-50-02-00 330704-000-090-50-02-00 330780-51-00

      Information

      Overview Manuals Linear Performance Order Code Definition Installation Requirements

      Features:

      • 3300 XL 11 mm Proximity Probe
      • M14 x 1.5 Thread
      • 90 mm Probe Case
      • 5.0 m Standard Cable
      • 4.0 mm Linear Range

      The Bently Nevada 330703-000-090-50-02-00 is an eddy-current proximity probe for non-contact measurement of conductive shaft surfaces. Its 11 mm system geometry supports a wider measurement range for machinery protection and condition monitoring.

      This configuration has an M14 x 1.5 thread, no armor, 90 mm case and 5.0-meter standard lead. Match it only with 3300 XL 11 mm extension cables and Proximitor Sensors selected for the required total electrical length.

      The 330703-000-090-50-02-00 Bently Nevada 3300 xl 11 mm proximity probe may be supplied and supported by Moore Automated according to the stated OEM lifecycle and confirmed stock condition.
      Bently Nevada 330703-000-090-50-02-00 3300 XL 11 mm proximity probe Manuals(Datasheets), Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

      Linear Performance:

      • Nominal 3.94 V/mm scale factor
      • 4.0 mm linear measuring range
      • 0 to 8 kHz frequency response
      • Minimum 30.5 mm target diameter

      Published performance applies to a complete matched 3300 XL 11 mm system installed against the specified target material.

      Order Code Definition:

      • 330703: M14 x 1.5 probe without armor
      • 000: 0 mm unthreaded length
      • 090: 90 mm case length
      • 50: 5.0 m total probe length
      • 02: standard cable without protector
      • 00: no approvals

      Retain the full order code because the metric mounting geometry, cable length and approval option are independently defined.

      Installation Requirements:

      • Use the specified M14 x 1.5 mounting thread
      • Provide a target at least 30.5 mm in diameter
      • Observe side-view and axial clearances
      • Match all 11 mm system components
      • Set the gap after final assembly

      Check the machine drawing and target geometry before installation, then verify the static output after the complete matched system is connected.

      Technical notes

      The 330703-000-090-50-02-00 is a 3300 XL 11 mm M14 x 1.5 proximity probe without armor, with 0 mm unthreaded length, a 90 mm case, 5.0-meter standard lead, no connector protector and no approvals.

      • Product Lifecycle Stage

        Active/Available from OEM

        Baker Hughes continues to publish the 3300 XL 11 mm system datasheet and ordering information. Moore Automated supplies high-quality Bently Nevada replacement probes, matched extension cables and spare parts. Verified configurations and rapid supply solutions help customers reduce machinery downtime.

      Ask our team:

      Related Products

      Browsing history

      FAQ

      View All Faqs
      • How can I identify 330703-000-090-50-02-00?
        Verify the full order code on the probe tag. It identifies a 330703 M14 x 1.5 unarmored probe with 0 mm unthreaded length, 90 mm case, 5.0 m standard lead, no connector protector and code 00 approvals.
      • Which components are compatible with 330703-000-090-50-02-00?
        It is compatible only with 3300 XL 11 mm extension cables and 3300 XL 11 mm Proximitor Sensors configured for the same total system length. It is not interchangeable with 8 mm, NSv, 25 mm or 50 mm system components.
      • Where is 330703-000-090-50-02-00 applied?
        It is used for shaft position and vibration measurements that require a 4.0 mm linear range, including differential expansion and machinery installations with larger measurement spans.
      • What installation checks apply to 330703-000-090-50-02-00?
        Verify the M14 x 1.5 mounting thread, 90 mm case, 5.0-meter lead, minimum 30.5 mm target diameter, side-view clearance and total system length. Match the 11 mm probe, extension cable and Proximitor Sensor before setting the gap.
      • Is 330703-000-090-50-02-00 available from stock?
        Moore Automated can confirm current inventory, the complete metric configuration, condition and lead time before shipment.
      • What warranty applies to 330703-000-090-50-02-00?
        Moore Automated provides the warranty stated in the quotation and order confirmation. Confirm the supplied condition and warranty terms before purchase.
      • How is 330703-000-090-50-02-00 shipped?
        The configured order is scheduled for dispatch within 3 days from Xiamen, Fujian, China, subject to final stock and order confirmation.
      Quantity
      Upload
      (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
      Get a Quote
      For more information on how your data is processed and stored by Moore Automated please read our privacy policy.
      Top Collections Top Products
      Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
      Moore Disclaimer: Moore Automated's sales automation equipment and related solutions are intended for industrial automation and business operational efficiency improvement purposes only. Product information, technical parameters, and application cases are for reference only and do not constitute an absolute guarantee of performance for any specific industry, scenario, or final application. Actual equipment performance may vary depending on factors such as the usage environment, system integration method, and maintenance conditions. Users should confirm compatibility and safety based on professional technical assessments. Moore Automated assumes no liability for any direct or indirect losses caused by improper use, modification, or failure to operate according to specifications, to the extent permitted by law.
      img0
      img0