Overview
manual
Network Performance
Installation Requirements
Features:
- 32-bit PCI PROFINET processor
- ERTEC 400 ASIC
- Four-port 100 Mbit/s real-time switch
Product Overview
6GK1161-6AA02 is a Siemens SIMATIC NET CP 1616 communications processor in 32-bit PCI format. It connects PC-based automation systems to PROFINET IO.
The card uses an ERTEC 400 ASIC and integrates a four-port 100 Mbit/s real-time Ethernet switch with RJ45 connections. It can operate as a PROFINET IO controller or device.
The official data sheet specifies a 5 V PCI supply, optional 6 to 9 V external supply, typical power loss of 4 W and an operating temperature range of 5 to 70 °C.
Technical Configuration
- Product Type: CP 1616
- Module Format: PCI 32-bit, 33/66 MHz, 3.3/5 V
- Network: PROFINET IO
- ASIC: ERTEC 400
- Ethernet Ports: 4 x RJ45
- Transfer Rate: 100 Mbit/s
- Backplane Supply: 5 V DC
- External Supply: 6 to 9 V DC
Application Context
It is used for real-time PROFINET IO communication between PC-based controllers, devices and industrial Ethernet networks.
It is compatible with PC stations providing a 32-bit 33/66 MHz PCI slot and software supporting the CP 1616 PROFINET IO controller or device functions.
The 6GK1161-6AA02 Siemens product is listed as Active/Available from OEM. Moore Automated supports order-code verification, replacement planning and spare-parts supply to help reduce maintenance risk and plant downtime.
Siemens 6GK1161-6AA02 Official PDF and Product Support
The first link opens the matched PDF directly in a new browser tab. The remaining links stay within Moore Automated.
Important Notice: Accessories, software, cables, licenses and calibration records are supplied only when specifically stated in the quotation or stock description.
The four 100 Mbit/s RJ45 ports support PROFINET IO, IRT and Media Redundancy Protocol. Configure controller or device operation according to the PC station project.
Application Detail
It is used for real-time PROFINET IO communication between PC-based controllers, devices and industrial Ethernet networks.
It is compatible with PC stations providing a 32-bit 33/66 MHz PCI slot and software supporting the CP 1616 PROFINET IO controller or device functions.
Key Parameters
- Product Type: CP 1616
- Module Format: PCI 32-bit, 33/66 MHz, 3.3/5 V
- Network: PROFINET IO
- ASIC: ERTEC 400
- Ethernet Ports: 4 x RJ45
Use a compatible 32-bit PCI slot and observe the 5 V backplane supply, optional 6 to 9 V external supply and 5 to 70 °C operating range.
Installation and Replacement Guidance
Verify PCI voltage/keying, NCM PC or development-kit configuration, network topology, external supply requirements and the four RJ45 connections.
The CP 1616 is a 32-bit PCI PROFINET IO processor using an ERTEC 400 and an integrated four-port 100 Mbit/s real-time switch. It supports controller/device operation, IRT, MRP and PC-based PROFINET communication within its specified power and temperature limits.
Before commissioning, verify the complete order number 6GK1161-6AA02, physical interface, engineering software or firmware requirements, and the configuration of the existing Siemens system.
