Overview
Manuals
How It Works
Modern Migration Recommendation
Features:
- ET 200B Digital Output Electronic Module
- SIMATIC DP, ELECTRONIC MODULE DIGITAL,FOR ET 200B
- W=235MM, 16 DO 24V DC, 2A, DEGR. OF PROTECT. IP20,STANDARD
The 6ES7132-0BH11-0XB0 is a Siemens SIMATIC DP series digital output electronic module designed for the ET 200B distributed I/O system and is now available as a spare part. This 235mm wide module has an IP20 protection rating and provides 16 standard-compliant 24V DC digital output channels, each with a rated output current of up to 2A, suitable for driving high-power DC loads in industrial environments.
For functional configuration and system integration, this module requires hardware configuration using specific terminal blocks (e.g., TB2/DC, TB2-4/DC, TB4/DC, or TB4-4/DC). It supports PROFIBUS DP network communication with a maximum transmission rate of 12 Mbit/s and integrates electronic short-circuit protection and inductive shutdown voltage limiting to ensure safe operation when controlling inductive and resistive loads such as solenoid valves, DC contactors, or indicator lights.
The 6ES7132-0BH11-0XB0 Siemens SIMATIC DP electronic module may still be available for purchase and support from Moore Automated Company beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6ES7132-0BH11-0XB0 SIMATIC DP electronic module MANUAL(Datasheets), Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The operating principle of this model is as follows: The module receives digital control commands from the main control CPU via a PROFIBUS DP bus interface. Its internal logic circuitry (powered by a logic power supply with a rated voltage of 24V DC and a typical value of 100mA) parses and processes these commands. Subsequently, the internal power transistor drive circuitry converts the low-voltage logic signal into a high-power 24V DC output signal, directly controlling the switching state of external actuators by closing or opening the corresponding output channels. For more product technical parameters, please visit the Siemens official website or refer to the official technical datasheet.
If this outdated module fails in your facility and you choose to upgrade the rack rather than purchase old inventory, Siemens recommends migrating the node to a modern distributed I/O platform: Alternative: SIMATIC ET 200SP; Equivalent function: ET 200SP Profinet/Profibus interface module equipped with two standard 8-channel high-function digital output cards (6ES7132-6BF01-0BA0). However, note that standard modern output cards typically output 0.5A current, not the 2A high-rated current of this older module. If 2A current handling capability is required, consider using the ET 200SP 4-channel 2A high-function module (6ES7132-6BD20-0CA0).
