Overview
Manuals
Loop Function
System Match
Validation Steps
Features:
- Digital Output Modules for the documented Yokogawa CENTUM VP.
- Number of output channels: 32 channels.
- Rated applied voltage: 24 V DC.
ADV551-P60 S2 belongs to the Yokogawa CENTUM VP and performs the documented digital output modules role in the Yokogawa CENTUM VP process-control system. The retained technical evidence records Number of output channels: 32 channels; Rated applied voltage: 24 V DC; External power supply rating: 24 V DC, 50 mA. The full marking, receiving hardware, connectors or terminals, configuration dependencies and installed position must be matched before substitution.
For installation, retain the Yokogawa CENTUM VP receiving position, connector or terminal arrangement and configuration record. After power restoration, review diagnostics and test the affected operating path before process release.
The ADV551-P60 S2 Digital Output Modules is supplied only after the complete hardware identity, condition and current OEM lifecycle status have been confirmed.
Yokogawa ADV551-P60 S2 Digital Output Modules Manual(Datasheets), Link
Important Notice: The linked document or internal product-family information must identify the listed model or its documented family. Confirm the complete order code, hardware revision and installed-system requirements before replacement. Accessories, cables, software and certificates are included only when stated in the quotation. All prices are shown in USD.
Loop Function: ADV551-P60 S2 performs the digital output modules function within the Yokogawa CENTUM VP. The retained documentation identifies number of output channels as 32 channels; apply that value only to this documented execution.
Match the complete label, hardware form and functional position before transferring any setting, cable or termination from the removed unit.
System Match: approve ADV551-P60 S2 only for the documented Yokogawa CENTUM VP process-control system. Compare rack, carrier or panel generation, connector keying, terminal numbering and all paired assemblies with the installation drawings.
Photograph both sides and the installed position before removal so revision markings, jumpers, addressing and channel allocation can be reconstructed accurately.
Validation Steps: isolate the equipment, remove stored energy and inspect the receiving hardware before installing ADV551-P60 S2.
Restore power in the approved sequence, review status and diagnostics, then test every affected control, signal, relay, communication, protection or monitoring path against the commissioning record.
